Wika pressure transmitter

NegotiableUpdate on 05/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Wika pressure transmitter is used as a measuring element and converts the physical quantity of "pressure" into an electrical variable. Vika defines a pressure transmitter as a pressure sensor with standardized electrical and mechanical interfaces and standardized output signals. Pressure sensors are commonly used to measure absolute pressure, gauge pressure, and differential pressure, and can easily complete measurements in a short period of time. Wika uses three of the most common pressure measurement principles in industrial measurement technology to manufacture pressure sensors - thin film sensors, thick film sensors, and piezoresistive pressure sensors. High demand applications in the R&D field and harsh environments in the manufacturing industry

Product Details

Wika pressure transmitterapplication

NETRIS wireless unit model with Wika ® 3 combinations used to provide remote monitoring of process pressure for non critical applications

Industrial pressure measurement of gases and liquids

Process industry: oil and gas, chemical and petrochemical, water and wastewater, power generation

As long as it is related to the hygiene industry and the food industry

Wika pressure transmitterFeatures

This measuring instrument is connected to the WIKA wireless unit NETRIS ® 3 combinations for use, supporting IIoT

Intrinsic safety Ex i, compliant with ATEX, IECEx

Measurement range 0... 0.1 to 0 160 MPa [0... 15 to 0 .. 20,000 psi]， And vacuum and+/- measurement range

Wika pressure transmitterdescription

Model PEU-2x and WIKA Model NETRIS ® The combination of 3 wireless units can be used for all applications that require remote network monitoring of liquid and gas process pressures. A typical application is the mobile parts of facilities or remote measurement locations.Wika pressure transmitterWith NETRIS ® The connection enables cloud based process and factory monitoring in industrial applications.

Through modification, machines and moving parts can be easily configured without the need for planning and recording wiring. Especially when continuous measurement is not required, the cost advantage is demonstrated.

Wika pressure transmitterCan achieve simple status monitoring.

The pressure value combined with temperature indication can detect potential faults caused by wear or system failures early, thereby reducing the risk of shutdown and damage.

The PEU-2x pressure transmitter is part of the WIKA IIoT solution. Through it, WIKA can provide a comprehensive solution for your digital strategy.

wika威卡压力变送器

NETRIS ® The Wika wireless unit supports IIoT and can be used for all applications that require centralized and networked remote monitoring of measurement instrument data.

The explosion-proof wireless unit receives digital data from the Wika measuring instrument through an intrinsic safety interface. This instrument adopts a fully enclosed casing with a protection level of IP65. It continuously receives data in configurable packet form through LoRaWAN ® Or Bluetooth ® Transfer to the cloud.

Using LoRaWAN ® The battery powered wireless transmission of "Long Range Wide Area Network" is based on LPWAN technology ("Low Power Wide Area Network"), which can achieve a large transmission range and long battery life.

The wireless unit is connected to a suitable Vicat measuring instrument through the accompanying plug connector (M12 or Hirschman connector). ATEX zone supports the replacement of wireless units during operation.

Through cloud and LoRaWAN ® The simple webpage configuration implemented by the network ("Long Range Wide Area Network") supports complete end-to-end encryption and bidirectional communication, ensuring the security of IIoT applications.

WIKA Wireless Device NETRIS ® 3 is part of the WIKA IIoT solution. Through it, WIKA can provide a comprehensive solution for your digital strategy.