Welding ball 11

NegotiableUpdate on 06/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The welding structure has a certain degree of continuity, so local cracks will propagate to the whole. Therefore, when designing the grid structure, the overall characteristics of the building project should be considered. When encountering welding structures, close coordination with the welding process should be carried out to solve the quality problems of the project itself.

Product Details

Welded ball is a type of grid accessory, and the welded ball joint steel grid structure made of welded balls has the characteristics of large span, high strength, light weight, beautiful appearance, and no need for support. Widely used in various sports venues, hotels, restaurants, and halls. The processing technology of welding balls must comply with standards in order to ensure safe use. So what issues should be noted during the construction of welded ball grid structures? Let's share:

1. The processing of welded ball grid frame members should strictly control the geometric dimensions, with an allowable error of ± 1mm. If the members cannot be installed, the cause should be identified and arbitrary pipe cutting is not allowed.

2. The dimensions of small and medium assembly molds must meet high-precision requirements, and deviations are allowed according to the steel structure construction acceptance specifications to avoid cumulative errors that may affect the overall installation quality.

3. The welding of the welded ball grid material should undergo welding process testing, and only after passing the test can a large amount of welding be allowed. The butt weld of the ball tube and the pull rod according to the design requirements must be fully welded; The quality of hollow balls should be randomly inspected; During installation, the elevation of the axis line should be rechecked.

4. Welding ball grid frame members and small assembly units should be painted with 1-2 degrees of topcoat before final assembly to reduce high-altitude operations. Brush twice after the grid is completed. For parts damaged by welding, installation, or oil stains, they should be sandblasted and then coated with primer and topcoat. The type, performance, and coating layer thickness of the paint should meet the design requirements.

The welded ball joint steel grid structure is made by welding steel hollow balls or pipes with steel pipes, and its welds include two types: ball joints and pipe joints. At present, there is a large diameter welded ball joint in the market, which is widely used in pipe truss engineering as a joint for large-span, large box girder and H-beam.