Water valve actuator

Water valve actuatorTechnical Specifications:

Water valve actuatorfuckProvide an explanation

1 fuckOrder of production:

A. Translate into EnglishactuatorConnect to the valve body.

B. Translate into EnglishPower supply and control signalLine connection completed.

C. rootAccording to the application conditions, the dip switch on the circuit board is set to the corresponding position.(See the setting instructions for details)

D. Connect the power, turn on the powerClose, corresponding actuator LED The indicator light should light up, press'Red' from Set button approximately 3 Second, perform valve stroke self-tuning (see self-tuning instructions for details), electric actuator and valve After the self-tuning process of the body is completed, the actuator enters normal operationIt will operate according to the control signal at that time.
※ During the actuator self-tuning process, do not disconnect the power and perform other operations

2 valveIntroduction to feedback signals:

holdThe actuator can provide real-time valve position feedback signals to the outside, and the direction of the feedback signal change is always consistent with the control signal ofCorresponding to the direction of change, the type of feedback signal can be set through the dip switch on the circuit board.

3、 personManual operation:

A.hitOpen the hood

B.severTurn on the power switch of the actuator, and the power indicator light should turn off

C.Translate into EnglishInsert the randomly attached special wrench into the top of the manual shaft

D.pressExplanation of the silk screen image on the upper cover: Rotate the wrench clockwise to make the spindle run upwards; counterclockwise rotation

E.handAfter the operation is completed, remove the manual wrench, reset the rubber plug, turn on the power switch, and enter the electric mode

F.specialWhen not in use, please insert the wrench into the groove of the upper cover and press it down to secure it

exemptlose. Once the manual wrench is lost, use the standard wrench 6mm The hexagonal wrench can also be operated