Water valve actuator

AtypeWater valve actuatorOperation Instructions:

ØfuckMake order

A.Connect the actuator to the valve body.

B.Translate into Englishpower supplyThe connection of the control signal line has been completed.

C.rootAccording to the application conditions, the dip switch on the circuit board is set to the corresponding position. (See the setting instructions for details)

D.Connect the power supply, turn on the power switch, actuator LCD screen and correspondingLEDThe indicator light shouldLight up, press' red ' Self tuning button approximately3Second, perform valve stroke self-tuning (see self-tuning for details)Explanation: Electric actuator and valve bodyofAfter the self-tuning process is completed, the actuator enters normal operation and will run according to the control signal at that time.

※ actuatorDo not disconnect the power and perform other operations during the self-tuning process

Ø Introduction to valve position feedback signal

The actuator can provide real-time valve position feedback to the outsideThe direction of signal and feedback signal changes is always consistent with the change of control signaltransformThe direction corresponds, and the type of feedback signal can be set through the dip switch on the circuit board.

ØWater valve actuatorofhandDynamic operation

A.severTurn on the external power switch of the actuator, and the power indicator light should turn off

B.hitOpen the protective rubber plug on the top of the actuator cover to expose the manual operation hole

C.Translate into EnglishInsert the randomly attached special wrench into the top of the manual shaft

D.Rotate according to the instructions in the silk screen image of the upper coverWrench, rotate clockwise and the spindle runs downwards; Rotate counterclockwise, mainaxisRun upwards

E.handAfter the operation is completed, remove the manual wrench, reset the rubber plug, turn on the power switch, and enter the electric mode

F.When not in use, please insert the specialized wrench into the groove of the upper cover and turn it towardsPress down the wrench to secure it in place to prevent loss.oneIf the manual wrench is lost, use the standard wrench6mmThe hexagonal wrench can also be operated

1.mustConducted by personnel who have received relevant training or have relevant work experienceInstall, installBe careful not to operate with electricity during the processMake and followRegulations for installing actuators.

2.The device contains electrical and electronic components, so it is prohibited to dispose of the product as ordinary waste after it is scrapped. The disposal method should comply with the regulations and requirements of the local government.