Water bath constant temperature oscillator

NegotiableUpdate on 12/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The water bath constant temperature oscillator is mainly suitable for oscillating cultivation of various liquid and solid compounds such as biology, biochemistry, cells, and bacterial strains in scientific research departments such as universities, oil and chemical engineering, health and epidemic prevention, and environmental monitoring.

Product Details

一、 SHA-CAWater bath constant temperature oscillatoroperation mode:

Reciprocating oscillation: As the name suggests, it means oscillating back and forth during oscillation, using inertia to oscillate the sample. Why use this oscillation method? Because when the viscosity of the liquid is high, this oscillation method works much better than cyclotron oscillation.

The SHA-CAWater bath constant temperature oscillatorTechnical Specifications:

◎ Model: SHA-CA

◎ Oscillation mode: reciprocating

◎ Power supply: 220V 50Hz

◎ Temperature control range: Room temperature -100 ℃ (LED)

◎ Temperature fluctuation: ± 0.5 ℃

Heating power: 1500W

◎ Timing range: 0-120min or normally open (mechanical timing)

◎ Oscillation frequency: 0-300r/min (LED), amplitude: 20mm

◎ Spring frame size: 400 * 300mm

◎ Sink size: 485 × 400 × 165mm

◎ Dimensions: 700 * 500 * 460mm

3、 Operating instructions:

1. Please read this manual carefully before use.

2. The working surface of the machine should not be excessively smooth (such as tiles, etc.).

3. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine, and there should be good grounding measures.

4. The whole machine is strictly prohibited from being used in an environment with direct sunlight.

5. The speed control should start slowly from low speed to high speed.

6. The machine may experience some displacement during high-speed oscillation, so it should be monitored by someone during use.

4、 Operation precautions

1. The workbench of the machine should not be excessively smooth.

2. The entire machine is strictly prohibited from being used in direct sunlight.

3. The speed control should start slowly from low speed to high speed.

4. The machine is oscillating at high speed and requires someone to supervise it.

5. The heating tube should be submerged in water to prevent dry burning.

6. The amount of water added should be higher than the heating tube and lower than the spring.