Wallace Rapid Plasticity Tester

NegotiableUpdate on 01/31

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Wallace Rapid Plastimeter is used to measure the plasticity value P0 of natural rubber and uncured rubber, and can obtain the plasticity retention rate (PRI) of rubber through the Wallace aging chamber. This device has the characteristics of precise temperature control, automatic setting of standard time and load, and precise adjustment of 1mm gap. It is suitable for measuring the plasticity retention index of raw rubber, evaluating the antioxidant performance of raw rubber, and the protective effect of anti-aging agents. Its C-shaped design is easy to operate, and the LCD guides the operation steps in real time, making the operation simple and repeatable. Compared with the Mooney viscometer, it can achieve rapid testing at a lower cost.

Product Details

The Wallace Rapid Plastimeter is used to measure the plasticity value P0 of natural rubber and uncured rubber. When used in conjunction with the Wallace Aging Chamber, it can obtain the plasticity retention rate (PRI) of rubber. The variable temperature performance of P14/vt allows for rapid testing of the flowability of synthetic rubber, which is more cost-effective than purchasing a Mooney viscometer. The C-shaped design makes operation more convenient, and the LCD guides the operation steps in real time. The operator can complete calibration and test preparation in a few seconds.

Technical parameters of Hua Lai Shi Rapid Plasticity Tester:

P14/1， Heating temperature for 2-3: 100 º C

P14/vt heating temperature: 60-180 º C

Test time: 15 seconds (preheating)+15 seconds (loading)

Load: 100N

Compliant with standards: BS 903: Pt. A59, ISO 2007, ASTM D3194

Key Features:

1、 Accurate temperature control.

2、 Automatic setting of standard time and load.

3、 Accurate adjustment of 1mm gap.

4、 Three different templates to choose from.

5、 Four types of rapid plasticity meters are available to meet different levels of requirements.

6、 Multiple uses to improve efficiency:

1. The plasticity value P0 of natural rubber and uncured rubber can be determined.

2. The variable temperature rapid plasticity tester (P14/VT) can provide a fast and low-cost alternative to the Mooney viscosity test.

3. Determination of plasticity retention index of raw rubber: PRI value can evaluate the antioxidant performance of raw rubber, and a high index value indicates good oxidation resistance.

4. PRI value can also evaluate the protective effect of anti-aging agents, and the higher the retention index, the better the protective effect.

7、 The framework design of P14's C makes it convenient for operators to load and remove samples.

8 On the front LCD panel, instructions are clearly displayed, allowing users to easily calibrate the instrument and test samples.

Nine High degree of automation, simple operation, and good reproducibility. When the handle is pressed, the instrument runs automatically. The test results are displayed directly on the LCD panel.