-
E-mail
3068879847@qq.com
-
Phone
13732586353
-
Address
No.15 Shihuan Road, Dongcheng District, Dongguan City, Guangdong Province
Product Categories
- Linear rapid temperature change test chamber
- Explosion proof high and low temperature test chamber
- Humidity Chamber
- Environmental laboratory
- High and low temperature test chamber
- thermal shock chamber
- constant temperature and humidity chamber
- Three box high and low temperature impact test chamber
- High and low temperature impact test chamber
Guangdong Kebao Experimental Equipment Co., Ltd
Walk in high and low temperature test chamber
NegotiableUpdate on 01/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The temperature control and energy-saving plan for the walk-in high and low temperature test chamber includes the following temperature control scheme: $r $n1. The chamber is cooled or heated by wind circulation (with good uniformity and fast speed). The temperature sensor transmits signals to the display touch screen, and then the touch screen PlD calculates and sends instructions to the PLC module for the coordinated operation of various components to achieve the required temperature. (Main components: cooling tower, water pump, heater, compressor, evaporator, sensor and other supporting accessories)
Product Details
Walk in high and low temperature test chamber
Technical Specifications
project |
Instructions |
name |
Walk in high and low temperature test chamber |
model |
KB-FT-S-109FZ |
quantity |
1Taiwan |
brand |
copal |
Inner box dimensions |
(Wide)*deep*High)6000mm*4540mm*4000mm |
outer box dimensions |
Subject to actual |
Internal volume of the box |
109m³ |
temperature range |
-40℃ ～ +80℃ |
temperature fluctuation |
Temperature ≤±0.5℃ |
temperature deviation |
Temperature ≤±2℃ |
Temperature Uniformity |
Temperature ≤2℃ |
data recording |
Data collection and storage per minute ≥1Next, data saving ≥1Year, not lost after power outage |
thermal insulation performance |
Should meetGB10592-2008Requirements of "Technical Conditions for High and Low Temperature Testing" |
warm-up time |
average3℃/minNonlinear no-load |
cooling time |
average0.7℃~1℃/minNonlinear no-load |
Temperature limit |
High temperature +80℃；low temperaturetemperature-40℃ |
Shell material |
Spray coating warehouse board |
Inner box material |
Stainless steel storage plate |
thermal insulation material |
Polyurethane rigid foam |
packing |
Silicone foam compression2article |
heater |
Stainless steel fin type heat sink tubular heating tube imported from Taiwan, China, China |
Wind turbine |
motor Stainless steel extended axis Multi blade aluminum alloy wind turbine Special adjustable hundred page air supply circulation system |
Similar Product Recommend
