WT0182-A50-B00-C00 eddy current sensor shaft vibration probe

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The WT0182-A50-B00-C00 eddy current sensor shaft vibration probe is widely used in many fields such as energy, chemical engineering, metallurgy, mechanical manufacturing, scientific research and teaching, and is constantly expanding. Eddy current displacement sensors (including probes, preamplifiers, and extension cables) can be used for online measurement and protection of many rotating machinery, including steam turbines, water turbines, centrifuges, axial compressors, centrifugal pumps, etc. For rotating machinery, excessive axial displacement can cause significant damage to the mechanism.

Product Details

WT0182-A50-B00-C00 eddy current sensor shaft vibration probeWidely used in various fields such as energy, chemical engineering, metallurgy, mechanical manufacturing, scientific research and teaching, and constantly expanding.

Eddy current displacement sensor(Including probes, preamplifiers, and extension cables),It can perform online measurement and protection on many rotating machinery, including steam turbines, water turbines, centrifuges, axial compressors, centrifugal pumps, etc. For rotating machinery, excessive axial displacement can cause significant damage to the mechanism.

WT0182-A50-B00-C00电涡流传感器轴振动探头

Technical Specifications

Static sensitivity Based on the output signal and corresponding range

power supply voltage ：1The+24Vdc(Output signal:1～5V、1～10V、4～20mA）

2The-24Vdc(Output signal:-2～-18V）

Note: Different output methods result in different power supplies

output signal ：1～5V、1～10V、4～20mA、-2～-18V（optional）

output method Three wire system (power supply, signal, common terminal)

resolution ：0.001mm

System temperature drift ：0.1%/℃

Frequency response: 0～10KHz(0.5dB)

Output Ripple: Voltage Outputlt;20mVCurrent outputlt;30uA

Working power consumptionlt;10mA (exclude4-20mAcurrent output)

output load Voltage output: Load capacity<10KCurrent output: load capacity<500Ω

Operating temperature preamplifier -30℃～+70℃ Probe -40℃～+100℃, cable -40℃～+150℃

weight ：500g±3%

working environment No strong magnetic field, no corrosive vapor liquid, no strong vibration source

Insulation resistance: ＞500MΩ

Installation of preamplifier

1Bottom plate installation,51mm×51mmUsing fourM4×12 GB29-76Bolt installation;

2Rail installation, can be easily installed on standard35mmOn the guide rail.

Eddy current sensors can be widely used for online monitoring and fault diagnosis of axial displacement, radial vibration of shafts, differential expansion, eccentricity, phase detector, swing, and shaft speed in large rotating machinery. Such as steam turbine units, water turbine units, compressorsLarge machinery such as machines, large cooling pumps, induced draft fans, gearboxes, coal mills, blowers, water pumps, wind turbines, etc At the same time, it is applied in fields such as material identification, surface roughness measurement, metal plate thickness measurement, and material deformation measurement It has also been widely applied.

WT0182-A50-B00-C00 eddy current sensor shaft vibration probe