-
E-mail
qdseaworld@163.com
-
Phone
15054290234
-
Address
Unit 203, Building 2, No. 130 Jiushui East Road, Licang District, Qingdao City, Shandong Province
Qingdao Sea World Marine Technology Co., Ltd
qdseaworld@163.com
15054290234
Unit 203, Building 2, No. 130 Jiushui East Road, Licang District, Qingdao City, Shandong Province
WAVES-1BType Wave Sensor
1Overview
WAVES-1B Wave SensorMeasure waves using the principle of gravitational acceleration. According to classical wave theory, the wave height, wave period, wave direction, wave energy density spectrum, and wave direction spectrum are calculated by measuring the motion posture and acceleration of the carrier. It has high measurement accuracy, low power consumption, small size, light weight, stability and reliability. This type of wave sensor strictly follows the measurement standardsGB/T14914The relevant provisions of the Ocean Observation Standards shall be implemented.
This type of wave sensor uses domestically produced motion sensorsSensors.

image1 Wave sensor
2 Technical and job indicators
2.1 technical indicators
(1)Wave height: measurement range(0m~30m)Measurement accuracy(±(0.1+5%×measured value)m);
(2)Wave period: measurement range(2.0s~25s)Measurement accuracy(±0.5s);
(3)Wave direction: measurement range(0°~360°)Measurement accuracy(±5°).
2.2 measurement data
(1)Conventional wave characteristic parameters include: average wave height, average wave period, one-third wave height, one-third wave period, one tenth wave height, one tenth wave period, maximum wave height, maximum wave period, wave direction, and wave number.
(2)Spectral characteristic parameters, including spectral significant wave height, spectral average period, spectral peak period, and spectral peak wave direction.
(3)Real time output of wave spectra, including wave energy density spectrum and wave direction spectrum. The directional interval is1°, all together360A directional point; The frequency interval is(0.5/64)Hz=0.0078125Hz, all together64Each frequency point has a corresponding wave direction and wave direction extension.
(4)Real time outputseaSurface change sequenceAt the same timeinSDCard storageseaSurface change sequence.
2.3 Work indicators
(1)Input voltage range:DC 10V~20V, typicalDC12V;
(2)Average power consumption:≦1.5W;
(3)Storage capacity: The raw data collected by wave sensors and the calculated wave characteristic parameters, wave spectra, sea surface change sequences, and other data are stored internallySDInside the card,SDThe card storage capacity shall not be less than8G;
(4)External dimensions:140mm * 140mm * 75mm(excluding external connectors);
(5)Weight: Approximately1.3Kg;
(6)Waterproof grade:IP66;
(7)Working temperature:-20℃~﹢50℃;
(8)Storage temperature:-25℃~﹢55℃.

image4 Display wave spectrum