-
E-mail
media@wanshsin.com
-
Phone
18975882416
-
Address
No. 158 Jinsha East Road, Ningxiang High tech Zone, Changsha City, Hunan Province
Product Categories
Wanxin Precision (Hunan) Co., Ltd
WAB series helical planetary gearbox
NegotiableUpdate on 12/08
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product parameters: high efficiency: transmission efficiency of over 97%, low noise: exquisite design, precision manufacturing, noise below 63dB (A), high input speed: maximum input speed can reach up to 10000 rpm, low backlash: single section less than 2 arc minutes, double section less than 3 arc minutes, high reduction ratio: modular design, planetary gearbox can be connected to each other, high speed ratio
Product Details
Product Details
Product Features
The planetary arm and output shaft adopt an integrated structural design to ensure maximum torsional rigidity. The planetary gear adopts a full roller needle design, increasing the contact area to improve structural rigidity and output torque. The gear is made of low-carbon steel surface carburizing and quenching to HRC62 to achieve the best wear resistance and impact toughness. The tooth profile is designed using imported software from abroad to achieve the best tooth profile and reduce noise. The input end is connected to the motor shaft using a double-sided clamping method to achieve maximum clamping force and zero backlash power transmission.
Industry Applications
In the fields of automation industry, industrial robots, metallurgy and mining, tobacco and light industry, environmental engineering, warehousing and logistics, plastic machinery, lifting and transportation, three-dimensional parking, automobile manufacturing, textile, food, beverage, ceramic industry, etc.
| WABSeries Performance Parameter Table/ WAB Series Performance Table | ||||||||||
| SpecificationsSpecification | unitUnit | section numberStage | reduction ratioRatio | WAB042 | WAB060 | WAB090 | WAB115 | WAB142 | WAB180 | WAB220 |
| Rated output torqueRated output torqueT2N | Nm | 1 | 3 | 20 | 55 | 130 | 208 | 342 | 588 | 1140 |
| 4 | 19 | 50 | 140 | 290 | 542 | 1050 | 1700 | |||
| 5 | 22 | 60 | 160 | 330 | 650 | 1200 | 2000 | |||
| 6 | 20 | 55 | 150 | 310 | 600 | 1100 | 1900 | |||
| 7 | 19 | 50 | 140 | 300 | 550 | 1100 | 1800 | |||
| 8 | 17 | 45 | 120 | 260 | 500 | 1000 | 1600 | |||
| 10 | 14 | 40 | 100 | 230 | 450 | 900 | 1500 | |||
| 2 | 15 | 20 | 55 | 130 | 208 | 342 | 588 | 1140 | ||
| 20 | 19 | 50 | 140 | 290 | 542 | 1050 | 1700 | |||
| 25 | 22 | 60 | 160 | 330 | 650 | 1200 | 2000 | |||
| 30 | 20 | 55 | 150 | 310 | 600 | 1100 | 1900 | |||
| 35 | 19 | 50 | 140 | 300 | 550 | 1100 | 1800 | |||
| 40 | 17 | 45 | 120 | 260 | 500 | 1000 | 1600 | |||
| 50 | 22 | 60 | 160 | 330 | 650 | 1200 | 2000 | |||
| 60 | 20 | 55 | 150 | 310 | 600 | 1100 | 1900 | |||
| 70 | 19 | 50 | 140 | 300 | 550 | 1100 | 1800 | |||
| 80 | 17 | 45 | 120 | 260 | 500 | 1000 | 1600 | |||
| 100 | 14 | 40 | 100 | 230 | 450 | 900 | 1500 | |||
| Emergency stop torque/ Emergency stop torqueT2NOT | Nm | 1,2 | 3 ~100 | Triple rated output torque/ Triple rated output torque | ||||||
| Rated input speed/ Rated input speed η1N | rpm | 1,2 | 3-100 | 5000 | 5000 | 4000 | 4000 | 3000 | 3000 | 2000 |
| Maximum input speed/ Maximum input speed η1B | 1,2 | 3-100 | 10000 | 10000 | 8000 | 8000 | 6000 | 6000 | 4000 | |
| Precision backlash/ Precision backlashP1 | arcmin | 1 | 3~10 | - | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 |
| 2 | 15-100 | - | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ||
| Standard backlash/ Standard backlashP2 | arcmin | 1 | 3~10 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 |
| 2 | 15 ~ 100 | ≤8 | ≤8 | ≤8 | ≤8 | ≤8 | ≤8 | ≤8 | ||
| Economic Backgap/ Economic backlashP3 | arcmin | 1 | 3~10 | ≤8 | ≤8 | ≤8 | ≤8 | ≤8 | ≤8 | ≤8 |
| 2 | 15 ~100 | ≤12 | ≤12 | ≤12 | ≤12 | ≤12 | ≤12 | ≤12 | ||
| Torsional rigidity/ Torsional rigidity | Nm/arcmin | 1,2 | 3-100 | 3 | 7 | 14 | 25 | 50 | 145 | 225 |
| Allowable radial force/ Allowable radial force F2aB | N | 1,2 | 3-100 | 780 | 1530 | 3250 | 6700 | 9400 | 14500 | 50000 |
| Allowable axial force/ Allowable axial force F2aB | N | 1,2 | 3-100 | 390 | 765 | 1625 | 3350 | 4700 | 7250 | 25000 |
| service life/ Lifespan | hr | 1,2 | 3-100 | 20000 | ||||||
| efficiency/ Efficiency | % | 1 | 3~10 | ≥97% | ||||||
| 2 | 15 ~ 100 | ≥94% | ||||||||
| weight/ Weight | kg | 1 | 3~10 | 0.6 | 1.3 | 3.7 | 7.8 | 14.5 | 29 | 48 |
| 2 | 15 ~100 | 0.8 | 1.5 | 4.1 | 9 | 17.5 | 33 | 60 | ||
| Operating temperature/ Working temperature | °C | 1,2 | 3-100 | -10°C~90°C | ||||||
| lubrication/ Lubricating | 1,2 | Synthetic lubricating grease/ Synthetic lubricating grease | ||||||||
| Protection level/ IP Grade | 1,2 | 3-100 | IP65 | |||||||
| Installation direction/ Installation direction | 1,2 | 3-100 | In any direction/ In any direction | |||||||
| noise value(n1=3000rpm,no-load) Noise level (η1=3000rpm,off load) | dB(A) | 1,2 | 3 ~100 | ≤56 | ≤58 | ≤60 | ≤63 | ≤65 | ≤67 | ≤70 |
