Vibration transmitter RCF-2-AD

Vibration transmitter RCF-2-AD

Vibration transmitter RCF-2-ADIt is a method of directly converting the peak to peak value of vibration velocity or vibration displacement into4-20m AIntegrated transmitter for current signal output,Its output can be connectedP L CThe
DCSSystem on-site display,Especially suitable for condition monitoring in harsh environments. It is mainly used for vibration monitoring of rotating machinery such as steam turbines, water turbines, fans, compressors, oxygen concentrators, motors, pumps, gearboxes, etc.
Regarding the vibration of the casing,Bearing vibration,Unbalance of rotor,Not in China,Loose components,Damage to rolling bearings,The vibration changes caused by gear damage and other reasons can be measured in real-time.
1. signal input:Magneto electric speed sensor
2． quantity Cheng: (User optional)
speed0～10mm/s; 0～20mm/s(valid value)displacement0～250um; 0～500um(peak-peak)
3. frequency range: 10～1000Hz(When outputting speed) 10～500Hz(When outputting displacement)
4. lose exit: DC4～20mAcurrent,Two wire output,Linear error not greater than±1%F·SOutput load resistance0～500Ω
5. Use power supply: 24VDC(±10%)
6. Usage environment:Operating Temperature:-10～ +65℃,relative humidity≤ 80%
7. Overall dimensions:∅46.5×90mm
8. Installation method:forM8screw hole,useM8Screw or fix on the machine bearing shell cover through a magnetic seat.

Power supply:+24+15% Vdc power supply, maximum power consumption of 0.5W; measurement range: 0~20mm/srms; (Range optional) Frequency range: 10-1000Hz; -3db; Sensitive direction: axial, installed in any direction/angle; Lateral sensitivity: ≤ 3%; Electrical isolation: 500Vrms, circuit and housing isolation; Current output: standard 4-20mA output; Accuracy (proportional to the effective value of measured vibration velocity): ± 2%; (Maximum load: 6002) Impact limit: 1000g; Weight: 0.2Kg; Protection level: IP67; Operating environment: -30~70 ° C; Relative humidity: not more than 95%, no condensation.