Vehicle interface heating source overheating system GB44263-2024

Vehicle interface heating source overheating system GB44263-2024

Equipment model: Sun GRT

Manufacturing unit: Shenzhen Sunshine Yueda Technology Co., Ltd

One Equipment Overview:

This system is tested by Sunshine Yueda in accordance with the latest standard GB44263-2024 "Safety Requirements for Conductive Charging Systems of Electric Vehicles" 9.4.2.1 AC Charging Interface Temperature Protection Function Test and 9.4.2.2 DC Vehicle Interface Temperature Protection Function Test. GB39752-2024 Safety Requirements for Electric Vehicle Power Supply Equipment

GB/T202341-2024 "Connection devices for conductive charging of electric vehicles - Part 1: General requirements"

GB/T20234.2-2015 "Connection devices for conductive charging of electric vehicles - Part 2: AC charging interface"

GB/T 20234.3-2023 "Connection devices for conductive charging of electric vehicles - Part 3: DC charging interface"

GBT-20234.4-2023 Connection Device for Conductive Charging of Electric Vehicles Part 4: High Power DC Charging Interface

IEC 62196-1:2014 plugs, electrical sockets, vehicle connectors, and vehicle entry lines Electric vehicle conductive charging Part 1: General Requirements

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements

Test requirements:The temperature of the DC power contact of the vehicle socket should not exceed the temperature limit specified by the manufacturer. The ambient temperature does not exceedAt 40 ℃, the temperature of the DC power contact of the vehicle socket during charging should not exceed 90 ℃.

It can record data such as current, temperature, heating power, etc.

II Main technical parameters of the equipment:

2.1. Control system: Using branded PLC controller and 7-inch touch screen operation;

2.2. Heating channel: 2 channels;

2.3. Adjustment method: 0-40W can be manually adjusted;

2.4. Heating rate: can be displayed and recorded on the touch screen;

2.5. Equipment power supply: 220V 50Hz;

2.6. Overall dimensions: (length x width x height mm) approximately 500 * 500 * 1200.

III More equipment information:

Sincerely thank you for clicking on this webpage to view and learn about our Sunshine Yueda productionVehicle interface heating source overheating system GB44263-2024If you would like to learn more aboutGB44263-2024，GB39752-2024，GB/T20234.1-2023，GB/T20234.2-2015，GB/T20234.3-2023，GB/T20234.4-2023 We welcome you to call or write to us at any time to communicate with the relevant testing equipment specified by the standards.