GB44263 Charging Interface Heating Source Simulation Vehicle Overheating System

GB44263 Charging Interface Heating Source Simulation Vehicle Overheating System

Equipment model: Sun GRT

Manufacturing unit: Shenzhen Sunshine Yueda Technology Co., Ltd

1、 Equipment Overview:

thatCharging interface heating source simulation vehicle overheating system is based on our Sunshine Yueda Technology

The latest standard GB44263-2024 "Safety Requirements for Conductive Charging Systems of Electric Vehicles" includes 9.4.2.1 AC Charging Interface Temperature Protection Function Test and 9.4.2.2 DC Vehicle Interface Temperature Protection Function Test. GB39752-2024 Safety Requirements for Electric Vehicle Power Supply Equipment

GB/T202341-2024 "Connection devices for conductive charging of electric vehicles - Part 1: General requirements"

GB/T20234.2-2015 "Connection devices for conductive charging of electric vehicles - Part 2: AC charging interface"

GB/T 20234.3-2023 "Connection devices for conductive charging of electric vehicles - Part 3: DC charging interface"

GBT-20234.4-2023 Connection Device for Conductive Charging of Electric Vehicles Part 4: High Power DC Charging Interface

IEC 62196-1:2014 plugs, electrical sockets, vehicle connectors, and vehicle entry lines Electric vehicle conductive charging Part 1: General Requirements

II Main parameters:

1. Control system: using branded PLC controller, 7-inch touch screen operation;

2. Heating channel: 2 channels;

3. Adjustment method: 0-40W can be manually adjusted;

4. Heating rate: can be displayed and recorded on the touch screen;

5. Equipment power supply: 220V 50Hz.

III Equipment testing requirements:

experiment1 Equipment over temperature protection test: for using connection methodAOr connection methodBAnd the maximum charging current is greater than16 A, orThree phase AC charging with maximum charging current greater than32 A（AC）The communication power supply equipment,

During the energy transmission phase, AC power supply equipmentSimulate power sockets or vehicles by applying heat sources, modifying temperature sensor parameters, and other methods while operating at rated currentIf the temperature of any power terminal of the plug exceeds the over temperature protection action value,

Check if the AC power supply equipment can reducePWMduty cycleOr cut off the AC power supply circuit and issue an alarm message.

experiment2 Vehicle over temperature protection test: for maximum charging current greater than16 A (AC)Electric vehicles, during the energy transmission phase,By applying heat sources, modifying temperature sensor parameters, and other methods,

Simulate the temperature of the vehicle socket exceeding the over temperature protection action value, check the electricityCan the on-board charger of a moving car reduce power output or stop charging.

4 More equipment information:

Sincerely thank you for clicking and entering this webpage to view and learn about the products produced by Sunshine YuedaGB44263 Charging Interface Heating Source Simulation Vehicle Overheating SystemIf you would like to learn more about GB/T20234.1-2023，GB44263-2024，GB39752-2024，GB/T43332-2023，GB/T20234.4-2023 We welcome you to contact us by phone or email at any time regarding the testing equipment specified by relevant standards.