Vacuum switch J6 series

Product Introduction

The J6 series of UE switch vacuum switches in the United States has stable performance and sensitive response. It was originally designed for air handling applications in instrument factories. Its compact design, sensitive settings, and narrow and adjustable dead zone provide a more cost-effective solution for various applications. The J6 series vacuum switch is very suitable for various industrial processes such as alarm/shutdown and low/high pressure measurement.

Technical Parameter

Scope: -1 .. 414 bar

Storage temperature: -54 .. 71°C

Environmental temperature: -40 degrees Celsius 71 ° C; for every 8 ° C change in ambient temperature,

The typical drift value of the set point is less than 1% of the full range

Repeatability: Models S126B-S164B, 126-364, 680 have an adjustable range of ± 1%,

Models 610-614 have an adjustable range of ± 1.5%

Impact resistance: After a 10 millisecond, 15G impact test, the set point can be reproduced

Anti vibration: After conducting vibration experiments at 2.5 G and 5-500 Hz, the set point can be reproduced

Shell: cast aluminum, epoxy powder coating, sealing gasket;

Shell grade: The shell grade is NEMA4X

Switch output: a single pole double throw (SPDT) output;

The switch can be connected as "normally open" or "normally closed"

Rated value: 15A 125/250/480 VAC, electrical switch has rated current capacity,

Electrical interface: 1/2 "NPTF

Pressure interface: Except for S126B-S164B: 1/2 "NPTF,

Actually, all model interfaces are 1/4 "NPTF

Weight: Approximately 0.68kg