Intrinsic safety ultrasonic level gauge ECHOTOUCH series US06

NegotiableUpdate on 05/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

● Provides a measurement range of 6m ● Reliable reflection and condensation technology measures ● Aluminum shell corrosion-resistant PVDF transducer ● 7.6cm beamwidth applied in limited space ● LCD display horizontal, inch, meter or percentage span ● HART communication in point-to-point and multi drop modes ● Fault safety diagnosis and selectable fault safety signal output ● Configuration displayed through buttons or WebCal software ● Automatic temperature compensation -40 º C... 80 º C

Product Details

Product Introduction

FLOOLINE ECHOTOUCH ® The US06 intrinsically safe reflective ultrasonic level gauge achieves continuous level measurement with a maximum range of 19.6 '(6m) through continuous 4-20 mA analog signals, and is set through its integrated button display module, WebCal software, or HART. These sensors are suitable for use in liquid collecting tanks containing media that are free of foam or prone to generating vapor (such as chemicals, water, waste water and oil). Typical application scenarios include collection tanks, daily supply tanks, neutralization tanks, clarification tanks, and wastewater tanks.

Technical Parameter

Range: 20cm... 6m

Accuracy: ± 0.2% up and down

Resolution: 2mm

Dead zone: 20.3cm

Wave speed width: 7.6cm

Display type: 6-digit LCD

Supply voltage: 14-28 VDC

Loop resistance: 500 Ω @ 24 VDC

Signal output: 4-20mA, two-wire, HART 7

Process temperature: -40 º C... 80 º C

Environmental temperature: -40 º C... 80 º C

Pressure: 2 bar

Shell rating: IP66

Shell material: Aluminum

Shell ventilation opening: water tight membrane

Electrical interface: 1/2 "NPT

Sensor type: Reflective

Sensor pad: PVDF (polyvinylidene fluoride)

Installation interface: 2 "NPT or 2" G

Installation gasket: N/a or Viton ®

Level: Intrinsic Safety

Explosion proof standard: Class I, Zone 1, Groups A, B, C, and D; Second level E, F, and G groups; Level 3; Level 1 Zone 0 IIC Group, Zone 20 IIC Group

Explosion proof certification: II 1G, EEx ia IIC Gc

Certification: CE