Vacuum cleaning robot YX-ip65 dust and waterproof test box

Dust proof experimental box

Product Introduction

Vacuum cleaning robot YX-ip65 dust and waterproof test boxSuitable for conducting IP5X and IP6X dustproof level tests on products, using a 7-inch touch screen and Panasonic PLC, which can display year, month, day, time, working time, etc. The inner box, sample rack, etc. are all made of stainless steel plates to ensure long-term use without rusting.

lVacuum cleaning robot YX-ip65 dust and waterproof test boxproduct image

Application background

The destruction of products and materials by natural dust (such as sand, dust, wind dust, etc.) causes incalculable economic losses every year. The damage caused mainly includes corrosion, fading, deformation, decreased strength, expansion, mold, etc., especially electrical products that are prone to fire due to short circuits caused by sand and dust. Therefore, conducting a dust-proof test on the shell for specific products or materials is a key procedure.

Applicable fields

Outdoor lighting fixtures, household appliances, automotive accessories, and other electronic and electrical products.

Implement standards

comply with IEC60529:1989 +A1:1999 +A2：2013《Degrees of protection provided by enclosures(IP Code)》、GB4208-2008《 Clause 13.4 and 13.5 of the "Protection Class of Enclosures (IP Code)" and Figure 3, as well as Clause 9.2.1 and 9.2.2 of GB7000.1 "Luminaires Part: General Requirements and Tests" and the requirements of Figure 6, and the requirements of Part La2 of GB2423.37-2006 "Environmental Testing for Electrical and Electronic Products Part 2" Dust Prevention Test

Equipment parameters

lProduct details

Product Features

1. Suitable for conducting IP5X and IP6X dust rating tests on products.

2. The shell is processed from high-quality domestic steel plates and coated with baking paint on the surface, which is beautiful and durable.

3. The inner box, sample rack, etc. are all made of stainless steel plates to ensure long-term use without rusting.

4. There is a transparent observation window (made of tempered glass material) on the door, and LED lighting is installed inside the box for easy observation of internal testing conditions.

5. There is a dust replaceable device at the bottom of the equipment, which can easily replace used dust

6. There is a vibration device installed inside the box, which can automatically alternate work to prevent dust from not sticking to the box wall and condensing.

7. There is an exhaust pipe inside the box, which can complete the vacuuming action on the sample (the sample needs to reserve an exhaust hole position).

8. Sand and dust test box control system: using a 7-inch touch screen and Panasonic PLC, it can display year, month, day, time, working time, etc. Control the dust blower, dust vibration, and total test time separately; This controller has the following arbitrary setting control functions:;

a. Dust blowing time (stop, blow): Choose any time setting for continuous or periodic dust blowing;

b. Vibration time: The vibration and stop vibration time automatically alternate;

c. Preset test time: The test time is 99 hours and 59 minutes;

d. Power on: off - on - off.

9. Heating system: The circulating air duct is equipped with a heater to prevent dust condensation, and the pipeline is wrapped with mica heating coils for safe and stable heat.

10. Vacuum system: equipped with vacuum pump, vacuum gauge, air filter, flow meter, pressure regulating triple piece, and connecting pipe.