Vacuum Box Cleaning Machine

Product introduction: Blister box cleaning machine, with 8 functional slots, equipped with circulating filtration system, automatic constant temperature system, throwing system, ultrasonic cleaning system, static drip system, etc. The equipment adopts water solvent washing and pure water rinsing, and is an environmentally friendly cleaning machine. Acoustic cleaning

The vacuum box cleaning machine has 8 functional slots and is equipped with a circulating filtration system, an automatic constant temperature system, a throwing system, an ultrasonic cleaning system, a static drip system, etc. The equipment adopts water solvent washing and pure water rinsing, and is an environmentally friendly cleaning machine.

Principle of sonic cleaning:

During the cleaning process, the impact of the "gasification phenomenon" generated by high-frequency ultrasonic waves and the continuous up and down movement of the system itself increase the friction of the liquid, thereby enabling the dirt on the surface of the workpiece to quickly fall off and achieve its high cleanliness.

Cleaning process:

Ultrasonic water cleaning (polishing) → Ultrasonic water cleaning (polishing) → Ultrasonic pure water rinsing (polishing) → Ultrasonic pure water rinsing (polishing) → Ultrasonic pure water rinsing (polishing) → Ultrasonic pure water rinsing (polishing) → Ultrasonic pure water rinsing (polishing) → Pure water slow pulling → Centrifugal dehydration

Whole machine structure:

1. Each tank is equipped with four overflow ports, with a width of 35mm. Each tank is an independent circulation tank, and the detergent is pumped out of the storage tank by a circulation pump, filtered, and then transported back to the cleaning tank, known as the mother and child tank circulation;

2. The vibrator is directly attached to the bottom plate of the groove, which is chrome plated and locked to the groove bottom with a thick stainless steel plate and screws, and then enclosed in a 0.8mm stainless steel box for locking;

3. Configure the fourth generation ultrasonic generator to fundamentally ensure the effective conversion rate of ultrasonic waves, guarantee the effectiveness of ultrasonic waves, and ensure the stability of the quality of the ultrasonic generator; The ultrasonic generator is equipped with a microcontroller and a unique timing system, which can adjust the cleaning time according to production needs and form a one-to-one (one generator corresponds to one cleaning tank) pattern, providing more flexibility in timing and ensuring consistency in cleaning;

4. Slow pull system: High precision surface cleaning requires not only a reasonable cleaning process and configuration, but also good dehydration effect. If there are any dirt or water accumulation points on the surface of the workpiece, it will cause coating failure. High temperature and slow dehydration of high-purity water is an essential process for high-precision cleaning of glass products. It effectively forms a uniform hot pure water film, rapidly dissipates surface moisture, and achieves high surface cleanliness, laying a favorable foundation for subsequent drying;

5. The throwing motor drives the linear slider to move up and down through an eccentric wheel, fundamentally ensuring the continuity of throwing, reducing the frictional resistance of throwing, and preventing damage to the throwing system due to the weight of the workpiece. This enables the throwing frame to drive the washing basket to move up and down in the cleaning tank.