VELP carbon and nitrogen analyzer

The Italian VELP CN 802 carbon and nitrogen analyzer is suitable for solid or liquid samples and has the following characteristics: The VELP CN 802 carbon and nitrogen analyzer can complete the analysis of carbon and nitrogen in a sample in 3-4 minutes, providing an ideal solution for high-throughput and fully automated analysis. $n

The Italian VELP company's CN 802 carbon and nitrogen analyzer can be applied to solid or liquid samples and has the following characteristics:

The VELP CN 802 carbon and nitrogen analyzer can complete the analysis of carbon and nitrogen in a sample in 3-4 minutes, providing an ideal solution for high-throughput and fully automated analysis.

Carbon and nitrogen analysis was carried out using combustion method. The samples were burned in a combustion furnace (CF), and then the moisture was removed by a physical condensation method (DriStepTM). The compounds produced by the combustion were reduced through a reduction tube (RF). The NDIR near-infrared detector can accurately determine the carbon content, and then the nitrogen content can be measured by the TCD detector after passing through the CO2 capture device.

VELP's independently developed NDIR near-infrared detector detects a line level of 0.01mg C and a detection range from ppm to 99% C.

Accurate and precise carbon and nitrogen analysis, with detection limits of 0.01mg C and 0.001mgN, respectively, and RSD%<0.5% (EDTA), can analyze sample sizes as low as 200mg or 1g, achieving ideal results with minimal consumable consumption.

Equipped with a dual carrier gas system, helium or argon can be used as the carrier gas, allowing for flexible selection without the need for hardware upgrades.

Combined with the VELP Ermes cloud platform, the operation status of the instrument can be accessed anytime and anywhere through a web page on a PC or mobile device.