VC0.1 F1PS Clark flowmeter model description

NegotiableUpdate on 05/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

VC0.1 F1PS Clark flowmeter model description $r $n Shanghai Viterui specializes in selling the full range of KRACHT products, including VC series and VCA series gear flowmeters, as well as SD1-I-24 and AS8-U-230 indicators that are compatible with the flowmeter. * We can provide original factory testing reports and domestic third-party testing reports. First hand source, looking forward to your inquiry! VC0.1 F1PS Clark flowmeter

Product Details

VC0.1 F1PS Clark flowmeter model description

The characteristics of Clark gear flowmeter:

1. Flow measurement is independent of the flow state of the fluid, as the elliptical gear flowmeter relies on the pressure head of the measured medium to drive the elliptical gear to rotate for measurement.

2. The higher the viscosity of the medium, the smaller the amount of leakage from the gear and measuring space gap. Therefore, the larger the viscosity of the measured medium, the smaller the leakage error, and the more advantageous it is for measurement.

3. Gear flowmeter has high measurement accuracy and is suitable for measuring the flow rate of high viscosity media, but it is not suitable for fluids containing solid particles (solid particles can jam the gear, making it impossible to measure the flow rate). If gas is mixed in the measured liquid medium, it can also cause measurement errors.

Measuring principle

Gear flowmeter is a high-precision flow meter for measuring volumetric flow rate. Its working principle is the positive displacement principle. The flow of the medium causes the gear to rotate, and the rotation of the gear is scanned by two non-contact pulse detectors. Each tooth generates a pulse, which is ultimately generated by a frequency signal proportional to the flow rate, and the flow rate value Q is obtained.

technical advantage

Gear flow meters have high machining accuracy, precise installation, and high resolution. Gear flow meters require that the measured medium be lubricating and cannot measure non lubricating media such as water. At the same time, gear flow meters are not suitable for fluids containing solid particles. If gas is mixed in the measured liquid medium, it can also cause measurement errors.

Application Guide

Gear flow meters are widely used in industries such as petroleum, petrochemical, natural gas, chemical, papermaking, automotive, and food. Gear flow meters are also used for measuring small flow rates with small diameters.

VC0.1 F1PS Clark flowmeter model description

Clark gear flowmeterCommon models:

POWERflow meterVC0.04F6PX

POWERflow meterVC0.04F6RS

POWERflow meterVC0.04K1PKX

POWERflow meterVC0.04P1PK

POWERflow meterVC0.04P1PS

POWERflow meterVC0.04P6PS

POWERflow meterVC0.04P8RX

POWERflow meterVC0.04P8RX/164

POWERflow meterVC0.1 F1PS

POWERflow meterVC0.1E1PS/156

POWERflow meterVC0.1F1PH

POWERflow meterVC0.1F1PS

POWERflow meterVC0.1F1PS/69

POWERflow meterVC0.1F1PX

POWERflow meterVC0.1F4PS

POWERflow meterVC0.1F7PS

POWERflow meterVC0.1K1PKX

POWERflow meterVC0.1P6PS

POWERflow meterVC0.2–AL2E

POWERflow meterVC0.2AL2F

POWERflow meterVC0.2AL2F/146

POWERflow meterVC0.2-AL2F/71

POWERflow meterVC0.2E1PS

POWERflow meterVC0.2E6PS