V-shaped positioning component

Our company's locking pins are all processed through a stepped heat treatment method, indicating that they are finely ground and have a high hardness of up to HRC55;

The internal expansion screw adopts a new process design, with excellent hardness and diameter to ensure the firmness of the ball bearings;

Usage: The locking pin is equipped with 5 concentric ball bearings inside. When the locking pin thread is loosened, the steel ball will automatically retract into the locking body. At this time, the locking pin can be inserted or withdrawn from the circular hole of the locked workpiece. When in use, the locking pin is inserted into the hole of the locked workpiece and gradually tightened by hand. At the same time, the steel ball gradually protrudes, and the locking pin automatically aligns and clamps the module. Then, tighten it with a wrench with appropriate tightening force. After tightening the locking pin, it can achieve a clamping force of 50KN and a shear force of 200KN.

Positioning angle ruler and positioning level ruler are both components used to ensure that the workpiece meets certain dimensional accuracy requirements during the machining process, and to precisely position the workpiece.

There are two working faces, whose functions are:

a) Adjust and accurately position the fixture table and all accessories, with an adjustment amount of an integer multiple of 25mm

b) Can be used for installing quick fixtures with elbow joint fixed plates

c) The positioning ruler can be used for positioning and clamping at 45 °, 90 °, 135 °, and 180 °

d) On the D28 series module, there are standard Φ 28 holes or long waist holes every 50mm, and on the D16 series module, there are standard Φ 16 holes or long waist holes every 25mm; They can all achieve fast positioning and clamping of workpieces