Welcome Customer !

Membership

Help

Qingdao Langke Electronic Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products
Product Categories

Qingdao Langke Electronic Technology Co., Ltd

  • E-mail

  • Phone

  • Address

    No. 188 Zhuzhou Road, Laoshan District, Qingdao City

Contact Now

Ultraviolet method for detecting ozone concentration in water

NegotiableUpdate on 06/26
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

The UV method water ozone concentration detector is a high-precision ozone detection product. Based on the principle of UV spectroscopic absorption, it uses the different absorption strengths of ozone for specific ultraviolet rays to achieve the purpose of ozone concentration detection. The instrument uses a UV mercury lamp light source, and emits 254 nm wavelength light that is absorbed by ozone gas through a UV absorption cell. The ozone concentration is calculated by combining Beer Lambert's law.

Product Details

1、 Company Profile

Qingdao Langke Electronic Technology Co., Ltd. was established inIn 2010, it was a high-tech enterprise integrating science, industry, and trade, specializing in the research and development, design, manufacturing, debugging, and maintenance of ozone detection instruments and meters. It is a professional supplier of ozone detection instruments and meters.

Since its establishment, the company has always adhered to technological innovation and product innovation, continuously expanding product applications. The company has independently developed high-precision ozone detectors such as full flow ozone concentration detectors and water ozone concentration detectors for the semiconductor industry, which can meet higher requirements for detection concentration and accuracy.

IIproductIntroduction

Ultraviolet method for detecting ozone concentration in wateris ahigh precisionThe ozone detection product is based on the principle of ultraviolet spectral absorption, using the different absorption strengths of ozone for specific ultraviolet rays to achieve the purpose of ozone concentration detection. The instrument uses a UV mercury lamp light source and emitsThe 254 nm wavelength light is absorbed by ozone gas through a UV absorption cell, and the ozone concentration is calculated using Beer Lambert's law.

This instrument is mainly used for measuringin the waterOzone concentration, measurement range can reach05mg/L。

mainfunction

1. Ozone concentrationmeasurement range05mg/L.

2The data shows stable and interference free performance, with real-time detection of ozone concentration.

3. Temperature compensation.

IIIworking environment

Ultraviolet method for detecting ozone concentration in waterThere should be no strong vibrations, strong magnetic fields, direct sunlight, corrosive or interfering gases around; Operating temperature range of the instrument5-45 ℃, humidity range 0-95% RH (non condensing), instrument power supply voltage is DC15V.

4Parameter Specifications

measurement range

05/10/20/50/150mg/L

precision

2%F.S

traffic

0.5L/min

pressure range

1.5bar

repetitiveness

2%F.S

Zero drift

2%F.S/月

response time

2 seconds to 95%

power input

15V

analog output

0-5V

serial communication

RS485, Baud rate 9600bps

size

170*65*160(mm)

weight

1kg

temperature range

5-45℃

interface

1/4 Flar

warm-up time

15min