-
E-mail
info@conasen.com
- Phone
-
Address
2-1702, Beichen New Era Building, No. 13 Beiyuan Road, Chaoyang District, Beijing
Product Categories
Beijing Kangansen Instrument Technology Co., Ltd
Ultrasonic level switch SWITCH-TEK series LU10
NegotiableUpdate on 05/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
● Intrinsically safe, CSA certified, suitable for hazardous environments ● Immersion Teflon made of PP or PFA material ® Sensors and cables, suitable for corrosive liquids ● The polarity of the 60VA relay can be controlled to be normally open or closed through power wiring ● Compatible with Smart Trak and Switch Pak installation accessories
Product Details
Product Introduction
The Flowline ultrasonic level switch SWITCH-TEK series LU10 from the United States has been certified by the Canadian Standards Association (CSA) and is suitable for hazardous environments. It uses a 1-way 1A relay output and can reliably detect the level of chemicals, solvents, hydrocarbons, and petroleum based liquids. Applicable media include fuel, acetone, and hydrochloric acid. Immersion level sensors are made of PP or PFA materials and are usually installed on tank walls or inside storage tanks for high or low level alarms.
Technical Specifications
Accuracy: ± 1mm (in water)
Repeatability: ± 0.5mm (in water)
Supply voltage: 12-36VDC
Power consumption: maximum 25mA
Contact capacity: GP: 60VA, IS: 32VDC@0.5A
Contact type: (1) SPST relay
Contact output: normally open (NO) or normally closed (NC) optional
Working temperature: -40 ℃ to 80 ℃
Pressure: 10 bar at 25 ℃, with each increase in temperature
1 degree decrease of 0.113bar
Sheath material: PP, PFA
Cable type: # 22 American 4-core shielded
Cable length: 3m
Installation interface: 3/4 "NPT (3/4" G/Rp)
Installation gasket: Viton ®
Protection level: NEMA 6 (IP68)
Level: Intrinsic Safety Type
Similar Product Recommend
