Ultra high pressure, reusable pipe fittings system

VHP-300
Ultra high pressure, reusable pipe fittings system
Suitable for pipes with an outer diameter of 1/16 "

Material selection
Pipe fittings: 316 stainless steel, PEEK^TMPolymer mixture

pressure range
The pressure range announced by IDEX Health&Science LLC is 20000 psi (~1380 bar) for sustainable working pressure when using stainless steel pipes. (Please note: This is based on testing conditions using water at room temperature; the maximum pressure value will vary under different usage conditions.)

temperature range
Up to 200 ° C depending on the parameters of the connection. (Please note: The higher the operating temperature, the smaller the pressure that the pipe fittings can withstand.)

critical dimension
0.8 "long x. 25" diameter (width of nut opposite side); 10-32 tapered external thread

Type of pipe fittings
Can be used for any rigid or semi-rigid pipe with an outer diameter of 1/16 "

Compliant with standard information
This product complies with current RoHS, WEEE, REACH, and related standards.

Important information
This product requires appropriate tightening torque to achieve the above pressure values. Therefore, IDEX Health&Science recommends a torque of 12 inch pounds (1.35N * m) that is not excessively tightened, which is approximately equivalent to turning 1/2 turn more than the hand tight design.