UV energy meter

NegotiableUpdate on 05/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The standard type of UV energy meter is a high-quality UV energy measuring instrument. UV energy meter is an instrument used to measure the UV energy of UV curing devices. The main sensor of the measuring instrument is located on the back of the measuring instrument, with a measurement range of 250-410 nanometers. During measurement, it can be directly displayed on the display screen on the front of the energy meter (unit: millijoules per square centimeter). The power supply of this energy meter is a 3.6V lithium battery, which can last for about 10000 hours due to the use of a special energy-saving circuit.

Product Details

1UV energy meterProduct Introduction

The UV-int150 standard UV energy meter is a high-quality UV energy measuring instrument. UV energy meter is an instrument used to measure the UV energy of UV curing devices. The main sensor of the measuring instrument is located on the back of the measuring instrument, with a measurement range of 250-410 nanometers. During measurement, it can be directly displayed on the display screen on the front of the energy meter (unit: millijoules per square centimeter). The power supply of this energy meter is a 3.6V lithium battery, which can last for about 10000 hours due to the use of a special energy-saving circuit.

IIUV energy meterProduct Parameters:
Test range: 0-5000MW/cm2
Display 6-character numerical LCD: 0-99999mj/cm2
Diameter: 90mm Height: 12mm
Spectral measurement range: 250-410 nanometers
◆ Heating high temperature: 70 ℃
◆ Switch: ON/OFF mode
Weight: Approximately 150 grams
Power supply: 3.6V lithium battery

3、 Installation/Operation:
Turn on the ON switch, and the LCD (display screen) will show zero.
Place the UV energy meter near the UV lamp source, aiming its back at the lamp source as much as possible (as the energy sensor of the energy meter is on the back), and extend the irradiation time appropriately.
Until there is a measurement display on the energy meter screen, such as 800 millijoules per square centimeter (800mj/cm2)。
Turn off the energy meter switch (OFF) or set the value on the display screen to zero.
◆ Precautions: Ensure that the temperature used in the factory is within 70 ℃.

4、 Attention:
Do not directly or indirectly use refracted/reflected UV lamps to ensure that no part of the body is directly exposed to UV lamps. This UV energy meter can withstand high temperatures for no more than 10 seconds on a conveyor belt, with a temperature resistance of 110 ℃
Customer case: BYD Auto; Foxconn Group; Xingying Technology; Getian Optoelectronics; Great Wall Motors and so on (there are too many, only these a few to represent)
After sales service: One year warranty from the date of sale