UV curing machine

1： UV curing machineoverview：

Scope of application: VU spraying, hardware, screen printing, glass, plastic, surface polishing treatment, UV ink, coating experiments, etc. Higher UV energy and stronger coating penetration ability;

Secondly:UV curing machinecharacteristic

1. Concentrated design, imported high concentration reflective lampshade, instant drying, fast speed;

2. Specially designed ventilation system inside the lightbox;

3. Each lamp can be adjusted for vertical angle and height;

4. The conveyor belt has infinite speed regulation, and the conveying speed is stable and adjustable;

5. Automatic adjustment device for transmission mesh belt, effectively preventing deviation;

6. Lamp abnormal protection device.

7. Switching between full and half lights, reasonable power saving.

3： Equipment body size

1. Equipment total length: 2000mm

2. UV working area: 1200mm

3. Feeding operation area: 400mm

4. Discharge operation area: 400mm

5. Entrance and exit height: adjustable from 100-150mm

6. Entrance and exit width: 500mm

7. Conveyor belt to ground: 750 ± 50mm

Four:UV curing machineEquipment main structure

1. Work area tunnel exterior: 1.2mm steel plate with baked paint set, model: A3

2. Working area tunnel cavity: 1.0mm high-quality zinc plate set, model: # 212

3. Body support frame: One set of square steel, model: 2 "square steel

4. Ventilation system: One set of forced ventilation combined exhaust fan (for extracting harmful gases) Model: SANGJING

5. Thermal insulation material: vacuum aluminum silicate+silk cotton double-layer model: 60K

6. Conveyor belt: Teflon mesh belt

7. Adjustable height of lamp tube: 100mm -200mm, manually adjustable by oneself

8. Balance device: Flat water foot cup model: 50 * 12 * 100mm

5： Equipment electrical part

1. Main switch: 50A

2. Total power: 7.0KW

3. Mesh belt inorganic speed regulation range: 0-10m/min

4. Transport motor: 800W

5. Governor: 500W

6. Exhaust fan: CY-125 type

7. Ampere meter: 50A per set

8. Voltage meter: one set of 220V

9. Working voltage: 220V ± 5% three wire system 50Hz

6、 Dry solid light source

1. UV radiation dry curing light source ensures the drying effect.

2. Effective radiation of ultraviolet light source

Lamp length, luminous length 560mm, total length 800mm, lamp power adjustable range (2KW-3KW adjustable height)

3. UV light source wavelength of 350 μ m ensures curing effect

4. 1 UV lamp tube, 3KW UV lamp installed horizontally in the inner cavity (left, top, right) (to achieve the best dry curing effect)

5. 1 set of controller panel

7、 Protective device

1. Overvoltage and overcurrent protection

2. Fault alarm prompt

3. Equipment overload protection