UV curing machine

Embedding is a very important step in the preparation process of metallographic specimens, especially for small and difficult to handle samples, irregularly shaped samples that require edge protection, or samples that require automatic grinding and polishing.

KGH-1000UV curing machineThe equipment is easy to operate, with a 30 second curing time and no waste of single component resin. It can produce 1-15 workpieces at once.Pour the resin into a specific cold inlay mold and place it in the working chamber. It only takes 30 seconds to obtain a transparent inlay sample. Quick sample preparation, no bubbles, can meet the needs of high-quality sample preparation.

Product Overview

There are problems with traditional metallographic sampling:

1. Cold inlay curing speed takes a long time;

2. The resin ratio operation is cumbersome

3. Curing and stirring can easily generate bubbles;

4. Insufficient or wasteful use of adhesive may occur when configuring.

KGH-1000 UV Curing MachineCan solve the above problems:

1. The curing time is calculated in seconds. It takes 30 seconds to complete the curing process, and 1-15 products can be cured at once

2. This machine uses single component glue, which is easy to operate;

3. The glue does not need to be stirred, it can be poured along the edge of the mold, which is not easy to produce bubbles,

4. Glue will not be wasted.