UTQ-301 series pneumatic float level regulator

The regulator measures the liquid level by converting the buoyancy generated by the displacement balance principle into a standard pneumatic signal based on the difference in buoyancy generated by the float at different heights. This regulator can be used for measuring liquid levels in industries such as chemical, petroleum, veneren, metallurgy, and power, and can be used in conjunction with pneumatic diaphragm regulating valves for base type regulation. The regulator measuring element is suitable for working under non corrosive conditions on the measuring part and can be used in devices with explosion-proof requirements.

Measurement accuracy: ± 2%
Medium specific gravity: 0.6-1.2g/cm³
Work pressure: ≤ 4.0MPa
● Air source: clean, dry compressed air, 0.14MPa
● Medium temperature: ≤ 200℃
Output pressure: standard, 0.02~0.1MPa pneumatic signal
Output pressure transmission distance: When the diameter of the output pipeline is 4mm and the transmission distance is 60 meters, the lag time is not more than 5 seconds
● Environmental temperature:- 10℃～50℃
Relative humidity of the environment: ≤ 85%

UTQ-301 Pneumatic Float Liquid Level Regulator Outline Dimensional Drawing

Installation diagram of UTQ-301 pneumatic float level regulator