UQZ-08 remote transmitter

UQZ-08 remote transmitter：

The XG/UQZ-08 remote transmitter consists of a liquid level sensor and a conversion module. The sensor of the transmitter is fixed in a bundled form on the outside of the main tube of the UZ type magnetic float level gauge, so that it is in the same magnetic coupling system as the level gauge. When the magnetic float moves up and down with the liquid level, the dry spring chip group corresponding to the liquid level position is affected and activated by the magnetic field inside the float, and the resistance chain value changes. The changed resistance signal is converted into a two-wire 4-20mADC standard signal output through the conversion module. This signal can be easily matched with our company's microcomputer industrial intelligent control instrument or connected to other secondary instruments to achieve the purpose of display, control, adjustment and alarm. There are zero position adjustment knobs and full-scale adjustment knobs on the circuit board inside the transmitter housing, which can easily determine the zero position and full-scale point positions.

characteristic：

Simple structure, easy installation, reliable performance, corrosion resistance, explosion-proof, and clear display.

Technical Parameter：

Measurement range: 500-15000mm

Measurement accuracy: ± 10mm, special requirements ± 5mm

Transmission output signal: 2-wire 4-20mADC

Power supply voltage: 24VDC

Load capacity:<>

Environmental temperature: -40 ℃~+120 ℃

Medium temperature: 180 ℃

Protection level: IP65

Explosion proof grade: intrinsic safety type: ib Ⅱ CT4; Explosion proof type: dIIBT4

Outgoing interface thread: waterproof M15x1.5

Internal thread: Explosion proof M20x1.5, internal thread