UL certified Beijiafu P+F control interface unit read-write head

NegotiableUpdate on 05/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The LED status indicator light $r $n for bus communication and read/write heads forms a network circuit $r $n through an integrated 2-port switch $r $n, which can connect up to 2 read/write heads $r $n or 1 read/write head and 1 trigger sensor $r $n UL certified Beijiafu P+F control interface unit read/write heads $r $n

Product Details

Excerpt from Parameter Table: Technical Parameters IC-KP2-2HB17-2V1D

Product Description
IDENTControl Compact Control Interface
Ethernet interface with support for TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP protocols

General Specifications
The maximum number of read/write heads is 2
Can choose 1 read/write head and 1 trigger sensor
UL Document Number E87056
Functional safety related parameters
MTTFd 140 a
Task Time (TM) 10 a
Diagnostic coverage rate (DC) 0%
Indicator lights/operating methods
Link/Traffic LED Green: Network Connection
Yellow: Blinks rhythmically when transmitting data
LED 1、 Status indicator for read/write heads
Green: Read/write header command activated
Yellow: Approximately 1 second long, if the command has been successfully executed
CH1 and CH2 LED green: Reading head detected
Red: Configuration error
Power/Error LED Green: Power on
Yellow: The system is starting up
Red: PROFINET bus fault
Rotary switch address setting
Electrical Technical Specifications
Rated working voltage is 20 .. 30 V DC ， PELV
Ripple ≤ 10% at 30 V DC
Current consumption ≤ 4 A, including read/write heads
Power consumption of 3.5 W without read/write head
The basic insulation of current isolation complies with DIN EN 50178 standard, with a rated insulation voltage of 50 Veff
Interface 1
Physical Ethernet
Protocol SMTP
HTTP
TCP/IP (port 10000)
MODBUS/TCP
EtherNet/IP
PROFINET IO
Transmission rate of 10 MBit/s or 100 MBit/s
Interface 2
Physical Ethernet
Protocol SMTP
HTTP
TCP/IP (port 10000)
MODBUS/TCP
EtherNet/IP
PROFINET IO
Transmission rate of 10 MBit/s or 100 MBit/s
Directive compliance
Electromagnetic Compatibility
Directive 2014/30/EU EN 61000-6-2
EN 61000-6-4
RoHS
指令 2011/65/ EU (RoHS) EN 50581
meet the standard
Protection level IEC 60529
environmental conditions
The ambient temperature is -25 degrees Celsius .. 70 °C (-13 ... 158 °F)
Storage temperature -40 degrees Celsius .. 85 °C (-40 ... 185 °F)
The maximum air humidity under climatic conditions is 96%
Salt spray resistance meets EN 60068-2-52 standard
Shock and vibration resistance (sine): 5 g, 10-1000 Hz, in compliance with EN 60068-2-6 standard
Shock (half sine): 30 g, 11 ms, in accordance with EN 60068-2-27 standard
Mechanical Specifications
Protection level IP67
Connect read/write head: shielded, 4-pin, M12 connector
Power supply: M12 connector
Protective grounding: M4 grounding screw
Ethernet: M12 plug connection
material
Aluminum powder coating on the shell
Install screws to fix
Mass approximately 300 g

UL certified Beijiafu P+F control interface unit read-write head