Type-C charging LED multifunctional pocket signal flashlight 2200mAh

Type-C charging LED multifunctional pocket signal flashlight 2200mAh

Product Features

1. LED lights, cold forged heat sink, increase heat dissipation area;

2. Multiple heat dissipation: cold forging heat sink, electrical heat dissipation chamber, light source chamber heat sink;

3. The electrical heat dissipation chamber mainly has multiple heat dissipation functions. Due to the upward movement of heat, the hot air emitted by the cold forging radiator is further dissipated through this heat dissipation chamber; Secondly, there is a transformer placed inside, and the radiator can also dissipate the heat generated by the transformer;

4. The tempered transparent part of the 150W chemical plant LED light is equivalent to a luminous bulb;

5. Light source cavity heat sink: not available in existing technology, mainly used to dissipate the heat emitted by tempered transparent parts;

6. Rear cover: mainly used for power outage and power outage when opening the cover; The back cover and electrical heat dissipation chamber are installed separately, and the power-off device for opening the cover consists of upper and lower devices; The upper part is installed inside the back cover and connected by a snap fit; Firstly, align the three protrusions on the upper part with the three notches on the back cover, and then rotate the upper part to insert the three protrusions into the card slot, thereby inserting the back cover; The existing technology is fixed by torsion springs, but torsion spring fixation is difficult to install and remove.

7. The lower part of the power-off device and the electrical heat dissipation chamber are also connected in the same way as described above, both of which are buckle type; The power-off device is powered on when in contact with the contacts, and powered off when separated.

Performance characteristics:
1. LED lights adopt explosion-proof or dust type explosion-proof type, suitable for lighting in gas or dust explosion hazardous areas.
2. The lamp is composed of a light source chamber, an electrical chamber, a wiring chamber, and other structures, and adopts a sealed waterproof design.
3. The outer shell of the lamp is made of aluminum alloy by integral die-casting, and the surface is coated with anti high voltage static electricity and anti-corrosion coating; The electrical chamber contains LED power supply, wiring terminals and other electrical appliances; There is a mirror reflector inside the light source cavity, which greatly improves the efficiency of the lamp.
4. The light source of the lamp adopts high brightness LED patch beads, which have high light efficiency, light attenuation, and a service life of up to 50000 hours.
5. The LED light adopts a waterproof driving power supply integrated with the LED light source, with a power factor greater than 0.95.
6. The transparent parts are made of tempered glass, which has high transparency and strong impact resistance.
7. The exposed fasteners of LED lights are made of high anti-corrosion stainless steel material; The light source chamber, electrical chamber, and wiring chamber are equipped with rubber sealing gaskets, which are reliable in sealing, strong in waterproof and dustproof properties, and safe and reliable.
8. LED lights are suitable for various installation methods such as pipe hanging, ceiling mounted, wall mounted, pole mounted, bent pole, flange mounted, guardrail mounted, and bracket mounted.

Technical Specifications:

Rated voltage: 220VAC 50Hz

Shell protection: IP66

Inlet thread: G3/4

Cable introduction: 6~8mm in diameter

Total weight: 16.6Kg

Dimensions: 480 × 340 × 170mm

Protection level: IP66

Level: Exd Ⅱ C T6 Gb

Anti corrosion grade: WF2

Power factor: ≥ 0.95

Type-C charging LED multifunctional pocket signal flashlight 2200mAh