Triple in one (filtration, washing, drying)

NegotiableUpdate on 09/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The three in one equipment for filtration, washing, and drying can replace both filtration and drying equipment (such as vacuum filters, filter presses, double cone dryers, drying ovens, etc.) simultaneously

Product Details

The "three in one equipment" for filtration, washing, and drying can replace both filtration and drying equipment (such as vacuum filters, filter presses, double cone dryers, drying ovens, etc.) simultaneously. Complete the entire process of filtration, washing, drying, and solid discharge within the same device. Widely used in industries such as pharmaceuticals, chemicals, pesticides, and food, it is the best equipment for filtration and drying. It can achieve fully enclosed and continuous production throughout the entire process, which is more suitable for the production of sterile and toxic products.
Filtering stage
Separation of product filter cake and mother liquor. The thickness of the filter cake can reach 400mm~500mm.
washing stage
The filter cake is further purified, and the residual mother liquor is washed and pre dehydrated. Mix the filter cake and washing solution layer by layer using a lifting mixer to form a slurry suspension. The filter cake is thoroughly washed.
A. Main material: SUS304 or 316L
B. Sealing gasket material: fluororubber, silicone rubber, ternary propylene.
C. Bellows material: 316L
D: Sealing form: Double end sterile mechanical seal.
E. Mixing shaft: There are two types of shafts: solid and hollow. Solid shafts are used for mixing without heating. When the mixing blades need to heat and dry materials, the mixing shaft is a hollow shaft head with a rotating joint, providing an inlet and outlet channel for the heated medium.
F. The mixer can be straight or S-shaped, and can be equipped with or without a scraper depending on the material properties. The material can be heated according to the situation. The stirring blades are formed in the form of circular tubes and triangles, and the internal cavity can be filled with a heat transfer medium to heat the material during filtration and washing. Plays a major role in the drying process.
Drying stage
Dehydration and drying treatment of filter cake: While the filter cake is gradually scraped loose by the agitator, the side walls of the equipment, the bottom of the filter plate, and the moving stirring blades simultaneously heat the filter cake, and the moisture evaporates rapidly to achieve the drying effect. The evaporation rate is accelerated by the vacuum method inside the equipment, and the evaporated moisture is taken away by adding treated hot nitrogen and other media to accelerate the drying of the material and improve the drying effect.