Tower crane CNC lathe FDL-46D

NegotiableUpdate on 03/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Tower crane CNC lathe FDL-46D

Product Details

◆Adopting an integral sleeve spindle, imported precision grade spindle bearings, and spindle servo motor drive to achieve high precision, high rigidity, and speed stability. The design of the heat dissipation plate spindle box is equipped with symmetrical reinforcement ribs, which can effectively reduce the temperature rise of the spindle, increase the stability of the spindle and the service life of the bearings.

◆High rigidity, bed tilted at 30 ° or 45 °, made of high-quality cast iron resin sand molding, with a tight ribbed structure, good rigidity and strong seismic resistance. The inclined placement of the large drag plate and tool holder makes the operation and chip removal of the machine tool very convenient, and occupies a small area with good comfort.

◆The two axis rotation is directly connected by a servo motor and a precision ball screw through an elastic coupling, with good force conditions and high positioning accuracy. It is equipped with a computer automatic lubrication system to forcibly lubricate the linear guide and ball screw.

◆The X-axis and Z-axis adopt high rigidity linear sliding rails, and the optimal span between tracks is obtained through calculation, with low resistance, high rigidity, and high precision. The displacement speed can reach 28M/min, improving work efficiency and shortening processing time.

◆The hydraulic station adopts Taiwanese variable displacement pumps, hydraulic motors, solenoid valves, and is equipped with air cooling devices, with low noise and low oil temperature.

◆Fully enclosed protection, good waterproof performance, and the base is cast as a whole.

Machine tool data \ \ model		unit	FDL-46D	FDL-52D
machine range	lathe bedMaximum rotation diameter	mm	Φ500	Φ500
	Maximum machining diameter（Plate）	mm	Φ300	Φ400
	Processing diameter on the cutting edge	mm	Φ125	Φ125
	Maximum processing length	mm	300	300
spindle parameters	Spindle Type		A2-5	A2-6
	COLLET SIZE		6-inch chuck/cylinder clamp	8-inch chuck/cylinder clamp
	spindle bore	mm	φ56	Φ66
	Diameter of pull tube through-hole	mm	φ46	Φ52
	Main spindle speed range	rpm	06000	04500
X \ \ Z-axis parameters	maximumtrip（X/Z）	mm	900/300	900/300
	Moving speed (X/Z)	m/min	30/30	30/30
	Number of knife tower workers		8/12 (optional)	8/12 (optional)
	Minimum setting unit (X/Z)	mm	0.001	0.001
Accuracy of each axis	Spindle indexing and repeated positioning accuracy	linear measure	±0.005°	±0.005°
	Spindle indexing and positioning accuracy	linear measure	±0.002°	±0.002°
	X/Z-axis repetitive positioning accuracy	mm	±0.003	±0.003
	X/Z-axis repetitive positioning accuracy	mm	±0.002	±0.002
Motor Power	Spindle motor power	kw	5.5/7.5	7.5/11
	Cooling water pump power	kw	0.25	0.25
	Hydraulic motor power	kw	0.75	0.75
	x-axiselectrical machinerypower	kw	1.7	2.4
	Z-axis motor power	kw	1.7	2.4
total weight of machine tool		kg	2800	3100
Dimensions (length * width * height)		mm	210016001950	230016002000

Note: Our company's machine tools are constantly undergoing research and development improvements. Any appearance and technical parameters are for reference only. Actual appearance and technical parameters are subject to ordering. www.fudao988.cn