- Phone
-
Address
No. 26 Dongfanghong East Road, Jiangdu District, Yangzhou City, Jiangsu Province
Product Categories
Jiangdu Tiancan Experimental Machinery Factory
Touch screen controlled plastic thermal deformation Vicat softening point temperature tester
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The ZB-909 touch screen controlled plastic thermal deformation Vicat softening point temperature tester is suitable for testing the Vicat softening point temperature and thermal deformation temperature of plastics and polymer materials. As an indicator for controlling quality and identifying the thermal performance of new varieties, the deformation is measured by a digital dial gauge, the temperature controller sets the heating rate, and the sample holder automatically rises and falls. Three samples can be tested at once.
Product Details
Machine model:ZB-909typeTouch screen controlled plastic thermal deformation Vicat softening point temperature tester
One Product Usage
ZB-909typeTouch screen controlled plastic thermal deformation Vicat softening point temperature testerSuitable for the determination of thermal deformation and Vicat softening point temperature of non-metallic materials and polymer materials,
Designed and manufactured according to international and national standards, this testing machine is widely used in the chemical industry, scientific research institutions, universities, and quality inspection departments,
It can also serve as an ideal testing equipment for professional production units.
II Applicable standards:
conform toGB/T 1633Test method for softening point (Vicat) of thermoplastic materialsGB/T 1634Test Method for Thermal Deformation Temperature of Plastic under Bending Load
GB8802andISO75TheISO306requirement
III Technical Specifications:
1. Temperature control range: |
Environmental temperature~300 ℃ |
2. Heating rate: |
(12±1)℃/6min [(120±10)℃/h] (5±0.5)℃/6min [(50±5)℃/h] |
3. Temperature error: |
±0.5℃ |
4. Deformation measurement method: |
Digital Dial Indicator |
5. Deformation measurement range: |
12mm |
6. Deformation measurement error: |
±0.001mm |
7. Number of sample racks: |
3a |
8. Heating medium: |
Methyl silicone oil (to be provided by the purchaser) |
9. Heating power: |
3.4kW |
10. Cooling method: |
150℃Natural cooling above, natural cooling or water cooling below 150 ℃ |
11. Protection function: |
Protection function with adjustable upper temperature limit (ambient temperature~300 ℃) |
12. Total mass of load rod and pressure head: |
68g |
13. Test load: |
|
AVika test load: |
GA=10N±0.2N GB=50N±1N |
BHot deformation test load (F): |
F=2×δ×b×h×h/(3×L) |
In the formula, F: |
The load required for the sample, in N units |
δ： |
Thermal deformation standard bending normal stress, unit Mpa |
-Method A: |
Using fiber stress of 1.80MPa |
-Method B: |
Using fiber stress of 0.45MPa |
-Method C: |
Using fiber stress of 8.00MPa |
b: |
The width of the sample, measured in millimeters |
h: |
The height of the sample, in millimeters |
L: |
Distance between two points, 100mm/64mm |
14. Power Supply: |
AC220V±10%、50Hz |
15. The purchaser shall provide their own methyl silicone oil: |
Flash point of 300 degrees, viscosity of 200 cubic meters, 20 liters |
1 set of weights:
serial number |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
weight of the weight |
2g |
5g |
10g |
20g |
50g |
100g |
200g |
912g |
1000g |
number of pieces |
6 |
3 |
3 |
6 |
3 |
3 |
6 |
3 |
12 |
Similar Product Recommend
