Tire Rolling Test Device Charging Gun Test Equipment

Introduction to Vehicle Rolling Test Machine

Tire Rolling Test Device Charging Gun Test Equipment

GB/T20234.1-2023

Vehicle Rolling Test Machine Product Overview: Suitable for pressure life testing of various electric vehicle charging piles. The power plug and vehicle plug with the manufacturer's recommended cable are randomly placed on the cement ground, and a car tire with the same load specification of P225/75R15 is pressed over the power plug or vehicle plug at a pressure of (11000 ± 500) and (5000 ± 250) N at a speed of (8 ± 2) km/h (tire inflation pressure of 220 ± 10kPa) to simulate the ability of the power plug or vehicle plug to withstand vehicle rolling. According to the standards, the vehicle compaction testing machine meets the requirements of GB 39752-2024, GB/T41589-2022, GB/T20234.1-2023, and GB/T20234.4-2023 for vehicle compaction testing

Technical parameters of vehicle compaction testing machine:

1. Control mode: PLC control,

10 inch Weilun touch screen human-machine interface intelligent operation;

2. Testing station: 1 station; Timing display: adjustable from 0-999999;

3. Process structure: A steel frame with surface electrostatic spraying is used to form the frame, and the bottom plate simulates a cement floor. The rolling mechanism can simulate a car rolling an object and slide up and down freely. The plug bears the same pressure and is equipped with limit protection. Another set of driving devices drives the rolling mechanism to achieve front and rear rolling actions. The main components are made of stainless steel and aluminum parts; Load capacity: 11000 ± 500N split type, detachable 6000N weight for two types of weights: 5500N and 11000N