Thermal network hydraulic working condition experimental bench

Specification: 2600mm × 400mm × 2400mm
Power: 220V 550W
Technical parameters: Simulate a hot water network, conduct various hydraulic condition simulation experiments, and understand the changes in the water pressure diagram of the heating network.
Main configuration: The lower part consists of pipelines, valves, rotor flow meters, organic glass stabilizing tanks, organic glass boilers, and anti-corrosion water pumps, used to simulate a hot water network consisting of 5 users. The upper part has a high-level water tank and 10 glass pipes installed on a vertical wooden board. The top of the glass pipe is connected to the atmosphere, and the bottom of the glass pipe is connected to the network branch point with a rubber hose. It is used to measure the head of the pressure measuring pipe (water pressure curve height) of the supply and return main pipes at the connection point of the heating network users. A ruler is attached between the two glass tubes of each group of users to visually read the pressure at each point.