The domestically produced wet sponge pinhole leak detector has no sparks and meets international standards

NegotiableUpdate on 01/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The domestically produced wet sponge pinhole leak detector has no sparks and meets the international standard $r $nSJ-6. The wet sponge pinhole leak detector is a multi voltage leak detector that applies wet sponge testing technology. Used to measure defects such as pinholes, gaps, and damages in insulation coatings below 500 microns on conductive substrates. No sparks will damage the anti-corrosion coating and comply with national standards.

Product Details

SJ-6 Wet Sponge Pinhole Leak Detector

I. Overview

SJ-6 wet sponge pinhole leak detector is a multi voltage leak detector that applies wet sponge testing technology. Used to measure defects such as pinholes, gaps, and damages in insulation coatings below 500 microns on conductive substrates.The domestically produced wet sponge pinhole leak detector has no sparks and meets international standards

2、 Technical parameters

Applicable detection thickness: Grade A ——300 microns;B gear——500 microns;C gear——500 microns;

sensitivityGrade A>90KΩ-5%；B level>125KΩ-5%；C gear>400KΩ-5%；

Battery: Lithium ion battery 11.1V/1100mAh；

Power consumption:≤0.5W；

Host weight:about500 grams

Size:290×53×53mm

Voltage indicationThree voltages correspond to each otherLEDLamp indication;

Battery Charging: Specially equipped with12VDC lithium battery constant voltage charger.

Sponge size:170×70×30mm

Probe length:195mm

Ground wire length:4m