Temperature sensing closed-loop temperature box

Temperature sensing closed-loop temperature boxCompact structure and high cost-effectiveness, it is an ideal testing equipment for precision production testing, research and development work, and standard testing laboratories. It refers to Chinese standards (GB4716-2005, GB4715-2005) and European and British quality standards (European EN54-5, European EN54-7, European EN14604, and British BS5446-2), and is equipped with a dedicated cooling system.

From the appearance, the TEST-2000 temperature chamber is mainly based on a circulating pipeline made of steel plate. The total length of the temperature chamber is 3.8m, the width is 1.7m, and the height is 1.7m. The width of the testing interval is 300mm and the height is 290mm. The design of the temperature chamber conforms to the characteristics of aerodynamics and can maintain normal and undisturbed operation under airflow between 0.5m/s and 0.8m/s.

Contains a heater that can achieve a heating rate of 30K per minute, and they can be detected as Class C in EN54-5. There is an insulation layer in the middle of the temperature sensing box, which can keep the temperature warm and measure it when the temperature rises or falls, in order to achieve the heating effect in the rapid heat spread test. The insulation layer reduces the height and width of the detection area by 30mm. The temperature sensing box is equipped with a thermocouple temperature sensor, including a fast sensor in the detection area.

From an operational perspective, the TEST-2000 is extremely convenient to use, making it easy for people to understand at a glance. The temperature chamber can be monitored by a computer with XP or Vista system, connected to the computer using a PCI multifunctional card that can provide analog signals and data input/output. The main control box contains interfaces and electronic control devices. The equipped software is easy to use, and operators can proficiently operate it after simple training. It also provides program functions for flexible configuration. The detection will adopt automatic operation, and the alarm status of the detector will be closely monitored, with sensitive display of alarm critical points. During detection, when all detectors enter the alarm state, the temperature chamber will be automatically cleaned and cooled, and the results will be displayed and recorded in the document.

Temperature sensing closed-loop temperature boxTechnical Specifications:
Studio volume (㎡)
3800 * 1700 * 1700mm (length * width * height)
Operation mode
Fixed value running/program running
Technical parameters
Temperature range
Normal temperature ℃~+160 ℃
Temperature Controller
Imported temperature controller/imported programmable temperature controller
temperature sensor
Pt100 platinum resistor
refrigeration system
refrigeration unit
Imported compressor unit
Cooling method
Mechanical single-stage compression refrigeration
cooling method
air cooling
heater
Nickel chromium alloy electric heater
Security protection measures
Overtemperature, overload, overvoltage, short circuit, power phase loss, phase error protection
circulating fan
Axial flow fan/centrifugal fan
Optional accessories
Communication interface, remote monitoring computer and software, LCD programmable touch screen program controller
power supply
380V±10％，50Hz，3P＋N＋G

material
housing material
Cold rolled steel plate electrostatic spraying
Inner wall material
SUS304 stainless steel plate
thermal insulation material
Rigid polyurethane foam/superfine glass wool