Medical constant temperature and humidity chamber

NegotiableUpdate on 12/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Medical constant temperature and humidity chamber is used to conduct environmental simulation tests on the physical and other related characteristics of products under low temperature, high temperature, temperature and humidity and their cyclic changes in accordance with national standards or user defined requirements. After testing, the performance of the product is judged through testing to determine whether it still meets the predetermined requirements, for product design, improvement, identification and factory inspection.

Product Details

Medical constant temperature and humidity chamber

Good stability touch screen controller

Home delivery with lifelong maintenance ensures worry free after-sales service!

Medical constant temperature and humidity chamber

Medical constant temperature and humidity chambers are suitable for testing the performance indicators and adaptability of electrical, electronic, and other products, components, and materials under constant humidity and heat conditions.

Structural characteristics of constant temperature and humidity chamber:

This series of wet heat test chambers is suitable for reliability testing of medical products under constant and alternating wet heat conditions. The performance indicators of the constant temperature box comply with the requirements of GB5170.18 "Basic Parameter Calibration Method for Environmental Testing Equipment of Electrical and Electronic Products".

Medical constant temperature and humidity chamberThe product complies with GB10592.89 and GB2423.22.87 standards for constant temperature and humidity control. The product adopts an imported temperature controller for temperature and humidity control, which can be programmed to set multiple parameters. The temperature and humidity are directly displayed digitally, and the operation of the constant temperature box is convenient.

The refrigeration system adopts imported compressors.
Electric heating steam humidification method.
Saturated gas humidification method.
The studio is made of stainless steel, and the outer box is made of cold-rolled steel plate with electrostatic spraying.
The outer box is made using CNC machine tools to ensure accuracy and aesthetic appearance.
Each system has security protection functions.

Medical constant temperature and humidity chamber model		YHS-50	YHS-100	YHS-150	YHS-225
		YHS-408	YHS-800	YHS-010	YHS-015
Studio size (mm)		300×400×450	400×450×550	500×600×500	500×600×750
		600×800×850	800×1000×1000	1000×1000×1000	1000×1500×1000
Operation mode		Fixed value operation, program operation
skill technique ginseng number	temperature upper limit	＋100℃/＋150℃/+200℃
	lower temperature limit	0℃、-10℃、-20℃、－30℃、－40℃、-50℃、-60℃、－70℃、－80℃
	Temperature fluctuation	±0.5℃
	Temperature Uniformity	≤2.0℃
	temperature deviation	±2℃
	humidity range	20～98％RH
	humidity deviation	＋2/－3％RH
	warm-up time	35min（20℃～100℃）
	Cooling time	25min（20℃～0℃）、40min（20℃～－20℃）60min（20℃～－40℃）、90min（20℃～－70℃）
Temperature and humidity controller		Imported constant temperature and humidity box temperature and humidity controller
temperature sensor		Pt100 platinum resistor
humidity sensor		Pt100 platinum resistance dry wet bulb
refrigeration system	refrigeration unit	Imported fully enclosed French Taikang compressor unit (environmentally friendly)
	Cooling method	Single stage compression refrigeration, binary cascade compression refrigeration
	cooling method	air cooling
heater		Nickel chromium alloy electric heater
Humidification method		Boiler type evaporation
humidifier		Stainless steel heating tube
Dehumidification method		Low temperature dehumidification
circulating fan		axial flow fan
Security protection measures		Overtemperature, overload, overpressure, oil pressure Protection against leakage, water interruption, short circuit, power phase loss, and phase error
material material	housing material	Cold rolled steel plate electrostatic spraying
	Inner wall material	SUS304 stainless steel plate
	thermal insulation material	Ultra fine glass wool
Standard Configuration		One test hole of size 50, two sets of test sample shelves, lighting fixtures, and insulated glass observation windows coated with electric heating film
Optional accessories		Communication interface, remote monitoring computer and software
power supply		380V±10％，50Hz，3P＋N＋G
product standard		GB10586: Technical Conditions for Damp Heat Test Chamber GB10589: Technical Conditions for Low Temperature Test Chamber
Test Method		GB/T2423.1、GB/T2423.3、GB/T2423.9、GJB150.4

Medical constant temperature and humidity chamber manufacturer, Nanjing constant temperature and humidity chamber manufacturer, Jiangsu constant temperature and humidity chamber manufacturer

医用恒温恒湿箱