Temperature calibrator TP28 850 series

Product Introduction

The German SIKA temperature calibrator TP28 850 series temperature calibrator uses electronic control to heat high-temperature alloy metal blocks. The metal block has one or three holes, and the temperature of the temperature calibrator block can be adjusted through buttons. In order to achieve single operation testing of temperature sensors and temperature transmitters, the German SIKA temperature calibrator has standard signal inputs (0-10V or 0 (4)... 20mA). The output is displayed directly in ℃. The accuracy of heating block temperature is the most important operating parameter for temperature calibrators. Due to the application of the newly designed microprocessor controlled PID controller, compared with the traditional analog controller, the current SIKA temperature calibrator has significantly improved the temperature accuracy. The controller can exhibit the slightest temperature deviation and control circuit interference in a way similar to intelligence.

Technical Parameter

Temperature range: ambient temperature+850 ℃

Tolerance: ± 0.5 ℃

Stability: ± 0.05 ℃

Resolution: 0.1 ℃

Control point compensation: ambient temperature between 0... 60 ℃

Display type: 7-section LED, 4 1/2 position, 14mm high

Display range: from ambient temperature to 850 ℃ at a resolution of 1/10 K

Display content: Block temperature or measured temperature

Digital interface: RS 232 C

Connecting sleeve: Drilling Ø 1.5~Ø 15.5mm (Ø 25mm when the block hole diameter is 28mm), 0.5mm allowance

Sensor damage: heating voltage cut off

Thermal circuit breaker protection: 2 independent thermal circuit breakers

Power supply: 230V, 50/60Hz

Size: 415 (515) x 290 x 410 mm

Weight: Approximately 16Kg