Technical parameters of new standard cement mortar mixer

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The technical parameters of the new standard cement mortar mixer are developed based on the construction characteristics of China's construction industry and relevant technical specifications. It is a specialized instrument with good reliability, wide range of use, wide temperature operating environment, small volume and light weight, simple operation, and easy portability. Damage to various parts caused by non-human factors

Product Details

JJ-20H new standard cement mortar mixerTechnical parameters:

Technical parameters of new standard cement mortar mixer1. Mixing blade speed

Speed gear	Rotation speed r/min	Revolution speed r/min
Low speed	140±2	62±2
High speed	285±3	125±3

2Technical parameters of new standard cement mortar mixerThe motion trajectory of the stirring blade in the stirring pot is the same as ISO679

3. Mixing blade width 135mm

4. Mixing pot capacity 5L, wall thickness 1.5mm

5. The working gap between the mixing blade and the mixing pot is 3 ± 1mm

6. The motor is a single-phase AC servo motor with a power of 750W

7. Dimensions: Length x Width x Height 620 x 420 x 815 (mm)

8. Net weight 75kg

New standard cement mortar mixerTechnical specificationsComposed of sand box, transmission box, main shaft, eccentric seat, mixing blade, mixing pot, base, transmission mechanism, support, protective cover, etc.

1. After each use, gently brush both sides of the test sieve with a brush, and check the sieve against sunlight or light. After passing the inspection, store the test sieve in a dry container or plastic bag.

2. When the test sieve is clogged, it can be placed upside down on the sieve seat, covered with a sieve cover for reverse suction, and then cleaned with a brush. If necessary, the vacuum cleaner suction tube can also be pulled out of the cyclone tube and directly sucked onto the sieve, while cleaning with a brush. If the sieve is severely clogged, the test sieve can be soaked in water for a period of time before brushing.

3. After using the instrument, turn off the power switch and wipe the outer surface of the instrument clean with a cloth.

4. If the cement powder in the dust collection bottle is almost full, the dust collection bottle should be removed from the cyclone tube (clockwise direction) and poured out before being removed (counterclockwise direction).

5. Vacuum cleaners should pay attention to regular dust cleaning to keep the dust collection bag clean and ensure that the negative pressure value meets the national standard requirements. When removing the vacuum cleaner, first unplug the power plug from the socket inside the box, and then turn the wrench in front of the vacuum cleaner downwards to detach it from the base. This way, the vacuum cleaner can be removed from the box for dust cleaning.

Technical parameters of new standard cement mortar mixer