Teaching Device for Carbon Storage Stratum Simulation and Low Carbon Environmental Ecological Response

Simulation of Carbon Storage Strata and Teaching of Low Carbon Environmental Ecological Responsedevice

1function

The main purpose of the system is to simulate geological dynamics and deep-water gravity flow processes, conduct research on sediment movement mechanics of traction flow and gravity flow, and monitor experimental process images in real time. During the experimental process, the system automatically and accurately measures and controls water flow rate and sediment supply through a computer, achieving data output.

IITechnical specifications

Sink length:5m

Flow section size:0.8m×1m

Water supply flow rate:200L/s

Power supply: AC380V

Power:30KW

IIIComposition of device structure

The device mainly consists of a tank structure, a sedimentation reservoir, an underground pump room, a slurry sediment supply system, an automatic sand addition system, a measurement system, a control system, a data acquisition system, etc.

four, An whole

The safe operation of the instrument involves the personal safety of the operator and the normal service life of the instrument. The manufacturer reminds the operator to pay attention to the following points:

*All types of instruments and computers must ensure correct power input and be equipped with automatic voltage stabilization protection devices.

*Ensure that all parts of the instrument have good grounding.

*The valve design of the instrument is manual operation. Please pre design the test process according to the test steps. Any valve operation error may lead to the failure of the entire test.

five, An pretend

All instruments have been installed and tested before leaving the factory. For the convenience of packaging and transportation, the instrument is divided into different parts for packaging. Please carefully refer to the flowchart during installation.

The installation work can also be jointly completed by the factory's technical personnel and the user, so that the user can further familiarize themselves with the instrument and facilitate daily maintenance in the future.

sixOh, fuck make, do, create, compose, write, etc.

Inject water into the sedimentation reservoir.

Inject sand into the sand container.

Adjust the opening of the outlet regulating plate.

Turn on the mixed flow pump and adjust the water flow rate through a frequency converter.

After the flow rate stabilizes, turn on the Gaza generator and adjust the amount of Gaza through the frequency converter.

Observe the sedimentation of sand in the sink.

seven, maintenance protect

The mixed flow pump and slurry pump should be cleaned regularly. For detailed maintenance, please refer to the instruction manual.

The computer equipped with this instrument is a dedicated control machine for the instrument. Do not copy software randomly, especially those of unknown originUSB drives and computer viruses may cause confusion and errors in control and data collection.

All parts of the instrument that come into contact with liquids are made of stainless steel, which has a certain degree of corrosion resistance, but it is not a one-time solution. The process manifold needs to be cleaned regularly. When the process is not in use for a long time, the manifold should be filled with oil or dried with high-pressure air to prevent rust and corrosion.

Long term use can cause normal damage to process seals, affecting sealing performance. Therefore, it is recommended to

Regularly conduct voltage withstand tests on instrumentsReplace the seal for the leaked part, and for regular users, a cycle of 3 months is recommended.