High temperature and high pressure isothermal adsorption system

Functions implemented by the instrument:

High temperature and high pressure isothermal adsorption systemMainly used for the determination of gas adsorption and desorption properties under high temperature and high pressure conditions, measuring the volume of adsorbed experimental gases such as methane at different pressure conditions to achieve adsorption equilibrium, with accurate measurement and good stability.

Capable of conducting binary gas competitive adsorption experiments.

Basic characteristics of the instrument:

1. This instrument is compatible with calibration of blank volume and standard volume, measurement of pore volume, measurement of adsorption volume, etc,Fully functional.

2With the support of the above functions, the software can achieve dynamic detection, allowing operators to grasp the experimental process and results at any time.

3. Imported components are selected for key configurations such as gas booster pump, pressure sensor, temperature sensor, balance, etc.

4. Implementreal-timeAutomation of operation, control, and collection.

5. Tested and calibratedThe gas used is helium, which is a colorless, odorless, non-toxic testing gas that does not pose a threat to the environment and meets environmental protection requirements. The adsorption gas used is methane gas, and certain protective and isolation measures have been taken.

Safety of instruments:

The security of the system is an important factor in ensuring the long-term effective operation of the instrument and protecting the personal safety of the operator. The device not only considers the safety and applicability, but also the safety is the first consideration. The system is equipped with a safety processing module and takes the following measures:

1. The sample cylinder is designed with double-layer protection of safety overflow valve and explosion-proof valve.

2. Designed with a secondary protection system for overheating and overpressure.

3. Designed with secure voice alarm and automatic power cut-off function.

4. The electronic control part is designed with methane gas leak detection protection and explosion-proof safety protection for methane gas.