Tai Shi Te Floor Thickness Tester

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The TST-LB720 floor thickness detector is used to detect the thickness of cast-in-place concrete floors, as well as concrete structures such as building floors, shear walls, beams, columns, and any other non-metallic structures. It can also detect the thickness of non-metallic plates such as rocks, glass, ceramics, and refractory materials.

Product Details

　Tai Shi Te Floor Thickness Tester TST-LB720It is a portable intelligent non-destructive testing device suitable for measuring the thickness of other non-metallic materials such as cast-in-place floor slabs, concrete or walls, columns, beams, wood, and ceramics; It can also be used to detect the thickness of concrete structures such as building floors, shear walls, beams, and columns, as well as to detect the thickness of any other non-metallic structure. It uses the principle of electromagnetic induction to perform non-destructive testing on the thickness of non-metallic structures. According to the standard, the product complies with the relevant provisions of the national standard "Code for Acceptance of Construction Quality of Concrete Structures" GB50204-2002.

Tai Shi Te Floor Thickness Tester TST-LB720It is a portable non-destructive testing instrument. Instruments for testing the thickness of concrete or other non ferromagnetic media using non-destructive testing methods; When in use, the transmitting probe and the receiving probe are placed on two opposite testing surfaces of the floor slab, respectively emitting and receiving electromagnetic fields. The instrument tests the thickness of the floor slab based on the received signal strength. The direction arrow on the host interface can be used to accurately locate the position of the transmitting probe and measure the thickness of non-magnetic media. Two people are required to cooperate with the test. The transmitting probe is fixed at the bottom of the tested floor, and the host is placed on the top of the tested floor to enter the measurement interface for measurement During testing, move the host according to the green arrow on the screen. When the host displays four red arrows, it indicates that the floor thickness detection is completed. At this time, the screen will directly display the floor thickness value (as shown in the figure below) The instrument can store data from 1000 different components and 220000 measurement points.

Instrument composition:Host, transmitting sensor, receiving sensor, signal cable, data cable, walkie talkie, telescopic pole, software CD, etc.

Technical Specifications:　

Scope of application	Used to measure the thickness of concrete floor slabs, as well as non-metallic plates such as rock, glass, ceramic plates, etc.
meet the standard	GB 50204-2015 "Code for Acceptance of Construction Quality of Concrete Structures";
	GBT/50784-2013 "Technical Standard for On site Inspection of Concrete Structures"
	JJF1224-2009 "Measurement and Calibration Specification for Thickness Measuring Instruments of Reinforcement Protection Layer and Floor Thickness Measuring Instruments"
Product features	Dual probe measurement for transmission and reception, real-time display of measurement information, test resultsaccurate.
	Automatic interpretation and locking of thickness values, without the need for manual intervention, greatly improves testing accuracy.
	Intelligent statistics of the maximum, minimum, average, and pass rate of the measured floor thickness, with a large amount of data storage.
	Professional data analysis software with * measurement, storage, deletion and analysis functions, automatically generating detection reports in Word format.
	The launch probe is equipped with a telescopic extension rod, which is conducive to high-altitude measurement
Thickness measurement range	40mm-1000mm
Thickness measurement accuracy	40mm-600mm ±1%
Thickness measurement accuracy	600mm-1000mm ±2%
Data storage capacity	200 projects or over 10000 measuring points
data transmission	USB
power supply method	Lithium battery
host size	23.5cm14cm5cm

　　Tai Shi Te Floor Thickness Tester TST-LB720Precautions for use:

1. Please read the accompanying manual carefully before using the instrument.

2. Work environment requirements: Environmental temperature range of 0 ℃ to 40 ℃; Relative humidity<90% RH; Without strong alternating electromagnetic fields, prolonged direct sunlight is not allowed; Necessary protective measures should be taken when used in damp, dusty, and corrosive gas environments.

3. Storage environment requirements: ambient temperature -20 ℃ to+60 ℃; Relative humidity<90% RH; store in a ventilated, cool, and dry environment, and avoid prolonged direct sunlight exposure; If it is not used for a long time, it should be powered on and checked regularly.

4. Avoid water ingress.

5. Shock resistance: During use and handling, severe vibrations and impacts should be prevented.