Anchor quality tester

Beijing Taishite Anchor Rod Quality Tester SH-BT：

1Anchor quality testerapplication field

Detection of anchor rod length, compactness, defect location, etc

2、 Support standards

Non destructive testing code for anchor rods in hydropower and water conservancy engineering (DLT5424-2009)

Technical Specification for Quality Inspection of Anchor Rod Anchoring (JGJT182-2009)

IIIAnchor quality testerworking principle

Inducing shock elastic waves through superparamagnetic excitation, utilizing the reflection characteristics, energy transfer, and attenuation properties of elastic waves. Using a super magnetic excitation device to emit a pulse signal on the top section of the anchor rod, which undergoes elastic wave reflection at the end face of the rod. By analyzing and judging the collected elastic wave reflection signals, the length of the rod body can be calculated and the anchoring density level can be determined.

4、 Technical parameters

1. Comply with the non-destructive testing regulations for anchor rods in hydropower and water conservancy engineering and the technical regulations for quality testing of anchor rod anchoring
2. Display mode: 8.4-inch 800 × 600 high-definition, touch LCD screen
3. Super magnetic source, synchronous transmission and reception, short aftershocks, adjustable energy levels of 1-10;
4. The host automatically controls the excitation of the seismic source without the need for an external amplifier;
5. Embedded Windows operating system, high stability, * compatibility;
6. Number of signal channels: 3 channels;
7. Trigger method: signal trigger, synchronous trigger
8. Detection range: 0.75m to 30m;
9. Sampling interval: 2~65535 us;
10. Sampling points: switchable between 1024 and 2048 points;
11. Test accuracy: better than ± 4%;
12. It has analysis functions such as spectrum assisted analysis, phase analysis, instantaneous energy, filtering, etc,
13. Automatically calculate length, determine compactness and anchoring level;
14. Portable handheld design, convenient, and compact;
15. Adopting A8+ARM main control unit, low power consumption, and effective working time up to 8 hours;

Beijing Taishite Anchor Rod Quality Tester SH-BTStandard configuration: