-
E-mail
373297665@qq.com
-
Phone
13883968605
-
Address
No. 2 Jingkou Xianfeng Street, Shapingba District, Chongqing
Product Categories
Chongqing Bangjie Oil Purification Equipment Co., Ltd
TYC-30 turbine oil deacidification filter
NegotiableUpdate on 10/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
TYC-30 Turbine Oil Deacidification and Filtration Machine I. Reasons and Hazards of Excessive Oleic Acid Value in Turbine Oil. Oleic acid value in turbine oil is a chemical indicator reflecting the degree of deterioration and deterioration of turbine oil
Product Details
1、 Reasons and hazards of excessive oleic acid value in turbines
Turbine oleic acid value is a chemical indicator that reflects the degree of deterioration and deterioration of turbine oil. An increase in acid value indicates that the turbine oil has deteriorated and produced acidic substances. The higher the acid value, the faster the rate of increase. The acid products generated from the oil deterioration will affect the demulsification degree, particle size, foam and air release value of the oil to varying degrees. Meanwhile, high acid value oil has a corrosive effect on metal components,.
2、 Technical characteristics of turbine oil deacidification and filtration machine
1. The turbine oil deacidification vacuum oil filter adopts vacuum negative pressure separation technology, which can quickly and easily separate a large amount of liquid water andfree waterIt can also remove dissolved water from oil and make cloudy emulsified oil clear and transparent.
2. High filtering accuracy and strong ability to remove impurities. Large scale capacity, high strength, filter can be repeatedly cleaned and used, low consumable cost, and long service life. It can remove fine particles from the oil and restore the severely polluted oil system to within the "Oil Pollution Control Standards for Running Steam Turbines".
3. The heater adopts an interlocking starting device, and the temperature controller can only be started when the vacuum pump and oil pump are running simultaneously, which not only ensures the safe operation of the heater, but also prevents the generation of "dead" oil zones and the aging of oil products. It can also monitor the temperature of the heating system in real time and control the heater to work within a set temperature range; When the temperature of the heater exceeds the protection set point, it can automatically cut off the operation of the heater, ensuring the safety of equipment, oil and personnel.
4. The oleic acid value of the turbine exceeds the standard, and it should be adopted firstVacuum oil filterDehydrate and filter impurities, and then treat them during operation through adsorption regeneration. By adsorption regeneration, acidic components, suspended substances, precipitated substances, polar substances, etc. in the oil can be removed, and the acid value in the oil can be reduced to0.03mgKOH/gThe device uses a special purifying agent, and the treated oil does not damage the basic components and antioxidant properties of the oil.
3、 Technical parameters of turbine oil deacidification vacuum oil filter
| indicator name | unit | TYC-10 | TYC-30 | TYC-50 | TYC-100 | TYC-200 |
| traffic | L/H | 600 | 1800 | 3000 | 6000 | 12000 |
| 真空度 | Mpa | -0.06 ~ -0.096 | ||||
| work pressure | Mpa | ≤0.3 | ||||
| Operating Temperature | ℃ | 0-70 | ||||
| heating power | KW | 9 | 24 | 30 | 60 | 90 |
| Total power | KW | 11 | 27 | 35 | 65 | 95 |
| acid value | (mgKOH/g) | 0.03 | ||||
| cleanliness | nas | 6 | ||||
| 水分 | ppm | 90 | ||||
| Inlet and outlet pipe diameter | mm | 25 | 25 | 25 | 38 | 50 |
| volume | m | 1.4*0.8*1.7 | 1.5*0.85*1.7 | 1.6*0.9*1.75 | 1.8*0.9*1.75 | 2*1.1*2.1 |
| weight | kg | 280 | 380 | 450 | 700 | 1100 |
consulting service/
Similar Product Recommend