TOPWORX limit switch TXP-M2CGNEM in stock in Shanghai

TOPWORX limit switch TXP-M2CGNEM in stock in Shanghai
TOPWORX limit switches are all imported and manufactured with original packaging. The TOPWORX limit switches are air shipped to Shanghai, China,
It is very convenient for foreign companies to order TOPWORX limit switches, and TOPWORX limit switches work together with the Shanghai office to provide market promotion. Customers in need can call us for consultation!

TOPWORX Limit Switch TXP-M2CGNEM Installation Instructions

1
Preparation before installation of TOPWORX limit switch TXP-M2CGNEM
Confirm the integrity of the parts: Open all packaging, confirm that there are no missing parts in each package, and arrange them in sequence.
Understanding switch characteristics: TOPWORX limit switches have high reliability and operate on the principle of magnetic attraction. When iron metal or magnetic targets enter the sensing range of the switch, the switch will respond to them. Its shell is mostly made of 316L stainless steel material, which has characteristics such as corrosion resistance and high temperature resistance. The working temperature range is usually between -50 ° C and 105 ° C.
Choose installation location: The installation location should be accurate and secure, avoiding installation near iron metal to prevent affecting the sensing distance. At the same time, it should be ensured that the mechanical actuator is not subjected to strong mechanical impact, and the limit switch cannot be used as a physical limit or mechanical stopper.

TOPWORX limit switch TXP-M2CGNEM in stock in Shanghai

II
TOPWORX limit switch TXP-M2CGNEM installation steps
Open the limit switch body: Use a screwdriver to loosen the screws and open the limit switch body part.
Adjust metal baffle: After opening, you will see a metal baffle. Use a flathead screwdriver to pry it up until it can fit into the head of a right angled triangle. The metal baffle must be raised, otherwise it cannot be inserted.
Fixed position and reset: After fixing the position, press the metal baffle back to its original position and press it down directly with your thumb.
Install the bottom outlet: Align the card slot and insert the bottom outlet, then cover it with a lid.
Install toothed baffle and rod: Install the toothed baffle upwards on the right angled head, and then install the rod.
Tighten the screws: Finally, tighten the screws to complete the installation of the limit switch. At this point, the sound of internal contact can be heard by moving the metal rod back and forth, indicating successful installation.

III
TOPWORX limit switch TXP-M2CGNEM installation precautions
Driving force direction:
For limit switches with push rod actuators, the direction of the starting force should be aligned with the push rod axis as much as possible.
For limit switches with control rod actuators, the direction of application of the driving force should be as perpendicular as possible to the control rod and its rotational axis.
Avoid strong impact: Ensure that the mechanical actuator is not subjected to strong mechanical impact, do not suddenly release the actuator, gradually activate and release to reduce the pressure applied to the switch mechanical structure and extend the switch life.
Wiring specifications:
The wiring of limit switches should comply with electrical specifications, ensuring that all electrical devices connected through conduit (including 70 series GO Switch switches with connector components) must be sealed to prevent water from entering through the conduit system.
The wire sealing fittings should be installed within 18 inches of the switch assembly and equipped with drip rings for drainage to prevent water ingress and premature failure of the switch.
When wiring, it is important to understand the specific meanings of each letter, such as NC for normally closed, C for common terminal, NO for normally open, etc. Choose the connection method according to actual needs. Generally, terminals 7 and 8 are used to connect the power supply.

TOPWORX limit switch TXP-M2CGNEM installation environment:
If installation is required in hazardous areas, please refer to local electrical regulations and take appropriate safety measures.
When installing the switch, ensure that its position is conducive to naturally draining the moisture that enters the switch box during operation. By installing the switch vertically and keeping the conduit inlet at the bottom, natural drainage can be achieved, which also makes the maintenance and replacement process simpler and easier.

4
TOPWORX Limit Switch TXP-M2CGNEM Debugging and Testing
Adjust the direction of the actuator: The direction of the switch actuator can be changed according to actual needs. For example, you can carefully remove the screws that secure the head to rotate it, then reposition the head assembly and tighten the screws to ensure that the head is in the appropriate position.
Test switch function: Test the actuator by hand to ensure that the switch function is normal and the actuator moves freely. When the head component is removed, if there is object deposition in the transmission system, adhesion may occur, and it should be cleaned in a timely manner.

TOPWORX Common Models
TXP-M2CGNEM
TXP-L2CGNPM
DXP-E40GN4B0000P
DXP-EH0GN4S
TXP-M2CGNPM

TXP-M2CGNEM
TXP-L2CGNPM
DXP-E40GN4B0000P
DXP-EH0GN4S
TXP-M2CGNPM

TOPWORX limit switch TXP-M2CGNEM in stock in Shanghai