- Phone
-
Address
No. 1090 Defu Road, Jiading District, Shanghai
Product Categories
Jiepu Instrument (Shanghai) Co., Ltd
TH5001 Hardness Testing Reagent
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
TH5001 hardness testing reagent, measuring range: 0.5-5.3 ppm CaCO3, used in conjunction with PACON 5000 hardness analyzer and PACON 4500H hardness alarm.
Product Details
Water produced by JENSPRIMA companyHardness reagentMust be withPACON 5000 Hardness AnalyzerandPACON 4500H Hardness Alarm DeviceUsed in conjunction with,By selecting different typesHardness reagentTo monitor the hardness of water quality in different ranges.
TH5001 Hardness Testing ReagentType and measurement range
Reagent model |
°dH |
°F |
ppm CaCO3 |
mmol/l |
TH5001 |
0.03-0.3 |
0.053-0.534 |
0.534-5.340 |
0.005-0.053 |
TH5003 |
0.09-0.9 |
0.160-1.602 |
1.602-16.02 |
0.016-0.160 |
TH5010 |
0.3-3.0 |
0.534-5.340 |
5.340-53.40 |
0.053-0.535 |
TH5030 |
0.9-9.0 |
1.602-16.02 |
16.02-160.2 |
0.160-1.602 |
TH5050 |
1.5-15 |
2.670-26.70 |
26.70-267.0 |
0.267-2.670 |
TH5100 |
3.0-30 |
5.340-53.40 |
53.40-534.0 |
0.535-5.340 |
Monitor water hardness in different ranges by selecting different types of hardness reagents.
TH5001 Hardness Testing ReagentType and measurement range:
Order Number |
model |
description |
33-5000-00 |
PACON 5000 |
Online hardness analyzer |
50-5000-10 |
spare parts kit |
Including: pump head (including pump tube), agitator, sealing ring, reagent bottle connecting tube, it is recommended to replace them once a year |
50-5001-01 |
TH5001 |
0.53-5.34 ppm CaCO3，0.005-0.053mmol/l |
Measurement method: Titration colorimetric method
Measurement time: about 3 minutes, depending on the hardness of the water
Power supply: 85-265 VAC, 47-63Hz, power consumption: 25VA (during operation), 3.5VA (during standby)
Protection level: IP65
Size: 300x300x200mm (WxHxD)
Display: Graphic backlit LCD display
Optional units: ° dH, ° f, ppmCaCO3, mmol/l, mg/l, mval/l, ° e
Output: 1. 4 sets of programmable relay outputs (max.250V, 4A)
2. 1 set of 0/4-20 mA signal, max 750 Ω
3. CAN bus output
Input: 1. IN1 input (start analysis/flow control switch/water meter) 2. IN2 input (reset device)
Analysis cycle: time interval measurement (5-360min)/external signal/flow signal
Rinse time: adjustable (15-1800s)
Water quality requirements: pH: 4-10; Iron:<3 ppm; Copper:<0.2 ppm; Aluminum:<0.1 ppm; Manganese:<0.2 ppm
Temperature: Environment: 10 ° C-40 ° C, Water sample: 5 ° C-40 ° C
Pressure: ca. 0.2-5 bar (max) (recommended 1-2 bar)
Similar Product Recommend
