TESCOM Compact Panel Voltage Regulator

TESCOM Compact Panel Voltage Regulator

TESCOM Compact Panel Voltage Regulator
This compact panel regulator is a central gas supply device that can be used to control the pressure of analytical gases in laboratory facilities. According to different requirements, these devices can be switched to backup gas cylinders to achieve continuous gas supply. The product is equipped with a contact pressure gauge, which can monitor empty gas cylinders. This product is suitable for implementing central gas supply for laboratory gas distribution systems. Ideal gas supply solution for laser cutting applications and various other processes that require continuous gas supply.

Specifications

Fluid medium

Non corrosive/corrosive gases and mixed gases with a purity of up to 6.0 (99.9999% by volume)

Pressure rating

Large import pressure: 4350 psi/300 bar
Export pressure range:
0-145 psig/0-10 bar
0-290 psig/0-20 bar

leakage rate

10-7Mbar l/s helium gas

material

Valve body: 316 stainless steel or nickel plated brass
Valve membrane: 316L stainless steel

Operating Temperature

-4 ° F to 158 ° F/-20 ° C to 70 ° C

Standard flow rate

10 m3/h (based on nitrogen), Cv = 0.06

clean

Clean, can be used for oxygen supply.

Import type and size

G 3/8 'internal thread interface
6mm card sleeve interface

Export type and size

Process export: G 1/4 '
Blow gas outlet: G 1/4 '
Pressure relief valve outlet: M 12x1 '

weight

17.6 lbs/7.9 kg (2 cylinders)
8.1 lbs/3.7 kg (1 gas cylinder)

function

• The valve and regulator are integrated into one housing, with fewer connecting components and a smaller internal volume
• Suitable for ECD (Electron Capture Detector) applications
• Short blowing time required for replacing gas cylinders
• Blow with process gas or inert gas
• Maintenance work is simple and fast, with P&ID provided in front of the panel
• Stainless steel mounting plate that is resistant to corrosive environments
• Adopting an extremely compact design (suitable for installation in most gas cylinder cabinets)
• All versions of imports are equipped with filter cartridges

• The valve and regulator are integrated into one housing, with fewer connecting components and a smaller internal volume
• Suitable for ECD (Electron Capture Detector) applications
• Short blowing time required for replacing gas cylinders
• Blow with process gas or inert gas
• Maintenance work is simple and fast, with P&ID provided in front of the panel
• Stainless steel mounting plate that is resistant to corrosive environments
• Adopting an extremely compact design (suitable for installation in most gas cylinder cabinets)
• All versions of imports are equipped with filter cartridges