Swiss DIGMESA miniature flowmeter for medical devices

DIGMESAFocused on measuring the flow rate of small liquids, used in fields such as chemical engineering, electronics, and food. Dandong Deze Technology Co., Ltd. is located in SwitzerlandDIGMESAZONG agent in Chinese Mainland. We are dedicated to handling business in mainland China In SwitzerlandDIGMESAThe networkYou can see Chinese partners introduced in Chinese on the link!

DIGMESAThere are nearly a hundred sub models of micro flow meters, covering a range of flow rates0.027-30L/min,Accuracy ±2%Repeatability ±0.25%The pressure is20At ℃10bar,temperature-10-100℃, pulse signal output (if displayed, none), each model has a flow curve and pressure loss curve. Both viscous liquids and highly corrosive liquids have specific models that can be tested.

SwitzerlandDIGMESAFlow meters were born from20century70In the middle of the year, this product, with its excellent design conceptExcellent performance and compact structure have gained high recognition and favor from those who demand precise measurement and flow control, becoming a leader in the industry. The product is widely used in the home appliance industry such as coffee machines, dishwashers, water purifiers, vending machines, and other similar productsyMedical equipment, laboratory equipment, beer machines, filling equipment, instrumentation, chemical spray painting, and even petroleum and other industrial equipment, among many other fields.

Swiss DIGMESA miniature flowmeter for medical devicesThe DigMesa flow sensor, imported from Switzerland, monitors the entire process to ensure that the liquid has actually been dispensed - even under the most difficult conditions. For example, in hospitals where corrosive media such as acid and alkali must be controlled when disinfecting disinfection equipment and surgical instruments.

Swiss DIGMESA miniature flowmeter for medical devicesPrecautions during use:

Ensure there are no reverse pressure fluctuations

• Ensure that there is no air in the system

Ensure that there is no air in the system

• Keep the pressure loss as small as possible

Ensure minimal pressure loss

• Note the mounting position of the flowmeter

Pay attention to whether the installation position of the flow meter is correct

• Min/max flow should be in the linear range of the selected flowmeter

The minimum and maximum flow rates should be within the linear range of the selected flowmeter

• Clean the system at appropriate intervals

Clean the system at appropriate intervals

• Avoid electrical current peaks

Avoid peak current

• Incorrect cabling of power supply +, signal and ground will destroy the flowmeter

Incorrect wiring, power supply+Signal and grounding will damage the flowmeter

• Do not mechanically load electrical contacts

Do not apply mechanical loads on electrical connectors

• Avoid moisture on the electrical contacts

Avoid moisture at electrical connection points