- Phone
-
Address
No. 77 Shenglong Road, Songjiang District, Shanghai
Product Categories
Shanghai Prima Electronics Co., Ltd
Surge current generator PRM41589-32-3
NegotiableUpdate on 05/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
This instrument is specifically designed to meet the requirements of residual operating current durability testing for the cable control and protection device (IC-CPD) for electric vehicle mode 2 charging, providing an evaluation basis for assessing the residual operating current durability of the IC-CPD. The product meets and exceeds the latest standard requirements of GB/T41589-2022.
Product Details
Product Introduction
This instrument is specifically designed to meet the requirements of residual operating current durability testing for the cable control and protection device (IC-CPD) for electric vehicle mode 2 charging, providing an evaluation basis for assessing the residual operating current durability of the IC-CPD. The product meets and exceeds the latest standard requirements of GB/T41589-2022.
Product features
>Ergonomic Design
>10.1-inch color touch screen control
>Switchable between Chinese and English
>Excellent craftsmanship, durable and long-lasting
>RJ45 interface, remote capability
>Built in temperature, humidity, and time display
>Built in current transformer, can be used to monitor current
productstandard
>GB/T 41589-2022、
>IEC 61851-1、
>GB/T 40820-2021、
>NB/T 42077-2016、
>IEC 62752-2016、
>IEC 62955、
>CNS 62752-2021、
>GB/T18487.1-2023
>GB/T41589-2022
>IEC 61851-1
Technical Specifications
Product model |
PRM41589-30 |
PRM41589-32-3 |
|
|
Current surges at a 90 ° phase angle
|
Peak current (200 ± 10) A |
||
The current rise time tr (peak value of 10% to 90%) is less than 20 μ s | |||
The current drops to (66 ± 3) A within 30 μ s to 50 μ s after reaching its peak | |||
rated current |
16A and 32A can be manually switched (current waveform is sine wave) |
||
Pre charge current |
30A (no pre charge current at rated current of 32A) |
||
Three testing methods |
Load test a, load test b, and connection test |
||
Remaining operating current I Δ n (mA) |
6. The six gears of 10, 15, 20, 30, and 60 can be adjusted through the knob switch on the panel (specific to the actual instrument) |
||
working power supply |
AC 220V ±10% 50/60hz |
||
Inrush current adaptation network parameters | |||
Carrying capacity |
AC MAX 220V/16A External network (7U chassis) |
Single phase AC MAX 220V/16A/32A Three phase AC MAX 380V/16A/32A |
|
General Parameters | |||
display screen |
10.1-inch touch screen |
||
Scope of working power supply |
AC 220V ± 10% 50/60Hz |
||
contact method |
RJ45 |
||
EUT power supply voltage injection |
Rubber head input |
||
ambient temperature |
15 ℃~35 ℃ (operating conditions) |
||
ambient humidity |
30% to 60% (operating conditions) |
||
atmospheric pressure |
86kPa~106 kPa (operating conditions) |
||
Instrument power |
200W |
||
Instrument size |
230mm * 450mm * 570mm (host) |
230mm * 450mm * 570mm (host) |
|
Instrument weight |
22kg (host) |
25.7kg (network) |
|
Instrument working status indication |
Front panel LED indicator light |
||
